Josh B

Laid everything out to see what was there Thought you guys might get a kick out of these pics. Everything is for sale by the way and I'll post prices at the bottom.

Josh B

944obscene

Woah. That's a lot of zinc. That's just a lot of clean parts.

Josh B

Exhaust manifold heat shield - $45
Cruise control motor - $45
Front sway bar drop links - $25
Front sway bar brackets(smaller) - $10
Coil strap - $5
Head rear water pipe - $15
Turbo water pump bracket - $65
Parking brake hardware - $15
Turbo y water line - $45
Engine bay harness brackets - $15
Hood upper and lower latches - $45
Turbo oil feed line - $85
Turbo short water line - $35
Turbo mount AOS line - $45
Turbo oil return line - $85
Hatch latch brackets - $5
Reference sensor bracket - $10
Front engine water pipe - $45
Idle control valve bracket - $45
Spare tire hold down bolt - $15
Engine heat shield bracket - $15
AC tensioner bar - $35
PS tensioner bar - $35
Emissions/test plug bracket - $15
Turbo dipstick tube - $45
NA dipstick tube - $25
Front turbo exhaust hanger - $15
AOS heat shield - $35
Master brake cylinder heat shield - $55 (Has two small holes in it)
Starter heat shield A - $35
Starter heat shield B - $35
Rear turbo exhaust hanger - $15
Fuel rail and jump line - $145
Engine oil pan seal heat shield - $20
Turbo steering linkage heat shield - $10 (Has small crack in it - works fine)
Rear drop links and camber bolts - $65
Headlight bar and hardware - $35
Turbo vacuum manifold - $25
Hood light socket - $10
Front shock upper mounts - $85
Wastegate mounts - $25
Door regulators - $10
Front brake lines - $45 pair
Rear brake line - $10(for one side as that is all I have)
Rear cam tower engine hoist bracket - $10
Cruise control assembly - $65
Front caster blocks - $25 each

Josh B

Yep Willing to work deals on bulk purchases too.....

Chads996

You sir, have a Zinc fetish.

C.

MM951

Are the jumper lines on the fuel rails new?

tifosiman

I zinc I would have to agree with that! LOL

smlporsche

To paraphrase an old James Bond movie...

Zinkfinger !

Keithr726

I'll gladly take contributions to my shinny project

MM951

WOW your car looks great. I've been waiting to see those body work shots. I'm super jealous.....

75ohm

Have the oil cooler shield for an NA yet!?

VOoDOoGTX

the two coolant lines in that picture one or each please . and the electrical harnesses that you have the metal ones with the new ruber

VOoDOoGTX

oh and the engine hooks both the front and the back haha and the hood latches.

and do you have hardware for the oil cooler(the engine mounted one) and the hardwear for the water pump, bolts for the cam cover and the head bolts?

and the pipes in this picture

aribop

I ended up with the n/a shields. Have several...