plyhammer

Just thought I would let you all know that I am starting in on a new parts car. It is an 88 NA. I was going to fix it up to make it a driver but it is missing a few to many parts. The story goes that it has a messed up clutch (which makes sense as the pedal was on the floor). The engine is out and looks to be in good shape. I will be checking compression and turning it over by hand but that is about all I can do on it. He had pulled the engine with the thought of doing the LT or LS swap. It has 15" phones that look to be in good shape. I need to do some cleaning. He actually started some powder coating as one motor mount bracket, the sway bar, and the cross member as they are all powder coated red. The trans appears to be an LSD (at least that is the option code) but something is amiss as when one wheel turns the other stays stationary (could be clutch? any ideas on that one would be appreciated. Interior is black with power seat on the drivers side. The seats are tore up. It has a black interior yada yada yada. Let me know if you have any wants or needs. I still have some parts left over from my previous parts cars including a turbo (almost done, still have the rear some of the rear including the axle shafts.) and a lot of late (mid) 944 peripheral type stuff.

Andy1212

Do you have a 951 rear valance? How much including shipping?

plyhammer

sorry andy, rear is sold on the turbo. Thanks for asking though. Really on the turbo it is just the rear axles and stuff, torque tube. Not much else.

Stien

What are your prices for pass. side fender, front valance, color? Also I am looking for a black "944" that goes on the back (mine was ripped off when I bought the car). How many millions for shipping to 02556? Thanks.

plyhammer

clever, the fender has a small dent and the valence is a part of that dent. It is red. I do have the 944 for the back for $5 shipped.

Stien

Done deal with the badge, how bad of a dent because my valence is a bit mangled and the fender has a narsty dent on the top. Red=perfect. PM me I guess with how you want to go about the transaction. Thanks.

dhall615

what about the cassette deck lid?

V2Rocket

Do you know if the tranny worked before the motor was pulled? It might just be worn-out clutch packs. How much would you be looking for for the tranny?

Wipeout

Feeler post on the cam tower housing.

Anaheim944

Pics of the powder coated parts?

plyhammer

Ok, clever, I will get a pic for you of the front valence and fender
dhall, it didn't have a cassette lid
v2-I was going to ask $1200 for the trans but with something wrong that I really don't know yet, I am shooting for $800. If I don't get that I will just pull it and see if I can fix it then resell it.
wipeout- I think I have a cam tower housing right now that is out of an 85.5 but will need to make sure.
I took some quick pics of what I have off of the car

AR10

Did you read my PM about the w/strip?
Thanks

plyhammer

Sure I received it. I have the part, just let me know.