Looking for all nine 1987 U.S. Turbo Cup cars
#436
Rennlist Member
Thread Starter
#437
Many thanks for the pictures Paul! They didn't exactly do a pretty job with these. I am going to notch, clean up and re-glue the carpet in front when I reassemble but the "X" cut in the back will stay. I will send you pictures when the car is completed and I am working to get the graphics redone based on your suggestions.
#438
Rennlist Member
Some interesting Euro Cup exhaust sections.
Factory Cat delete - not sure which series this was from. Possibly the French Cup, as the German Cup cars ran cats.
I am also not certain which series or cars the muffler delete section w/ the small resonator (Paul, I think you have this setup on your car) was used.
I think all the US cars were imported with full stock exhaust (cats and mufflers), correct? The canadian cars had the 4" open "Walker" exhaust installed by Canadian Pragmatics after importation.
Factory Cat delete - not sure which series this was from. Possibly the French Cup, as the German Cup cars ran cats.
I am also not certain which series or cars the muffler delete section w/ the small resonator (Paul, I think you have this setup on your car) was used.
I think all the US cars were imported with full stock exhaust (cats and mufflers), correct? The canadian cars had the 4" open "Walker" exhaust installed by Canadian Pragmatics after importation.
#439
Rennlist Member
Thread Starter
Some interesting Euro Cup exhaust sections.
Factory Cat delete - not sure which series this was from. Possibly the French Cup, as the German Cup cars ran cats.
I am also not certain which series or cars the muffler delete section w/ the small resonator (Paul, I think you have this setup on your car) was used.
I think all the US cars were imported with full stock exhaust (cats and mufflers), correct? The canadian cars had the 4" open "Walker" exhaust installed by Canadian Pragmatics after importation.
Factory Cat delete - not sure which series this was from. Possibly the French Cup, as the German Cup cars ran cats.
I am also not certain which series or cars the muffler delete section w/ the small resonator (Paul, I think you have this setup on your car) was used.
I think all the US cars were imported with full stock exhaust (cats and mufflers), correct? The canadian cars had the 4" open "Walker" exhaust installed by Canadian Pragmatics after importation.
I found one of the race mufflers on ebay several years ago, posted a photo last year, here's the post:
https://rennlist.com/forums/7512815-post299.html
#441
Rennlist Member
Thread Starter
Many thanks for the pictures Paul! They didn't exactly do a pretty job with these. I am going to notch, clean up and re-glue the carpet in front when I reassemble but the "X" cut in the back will stay. I will send you pictures when the car is completed and I am working to get the graphics redone based on your suggestions.
Also, I bought a bunch of race decals I didn't use, let me know if you'd like a list to see if you'd like to buy them for your car.
#442
Rennlist Member
#443
Rennlist Member
Thread Starter
It is teardrop or egg shaped, shaped like a cam lobe, with the pipe centered in the lower large diameter end.
Found this image of a cam lobe, the little muffler is shaped almost exactly like this.
.
Found this image of a cam lobe, the little muffler is shaped almost exactly like this.
.
Last edited by centerpunch; 05-19-2011 at 03:21 PM.
#444
Rennlist Member
Thread Starter
Saw this on ebay, too small for me, but thought someone might want it.
(Rothman's Turbo Cup polo shirt, medium)
http://cgi.ebay.com/ws/eBayISAPI.dll...m=250825585717
(Rothman's Turbo Cup polo shirt, medium)
http://cgi.ebay.com/ws/eBayISAPI.dll...m=250825585717
#445
Racer
Join Date: Nov 2007
Location: Waterloo, Ontario, Canada, eh
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
FYI cup car for sale in Toronto:
http://www.pcaucr.org/classifieds?pa...d=9947&catid=1
$ 49,500.00CDN
Regards,
doug
86 951 (http://www.pcaucr.org/visuals/photos...egory&catid=61)
01 E320 (W210) 4matic Wagon (http://www.benzworld.org/forums/w210...body-do-2.html)
00 540i-6 (http://forums.bimmerforums.com/forum...hp?albumid=976)
94 855 turbo Wagon (sold in 09)
85 535i-5 (sold in 07)
76 300D (sold in 92)
83 944 (sold in 86)
I apparently only buy cars designated by numbers
http://www.pcaucr.org/classifieds?pa...d=9947&catid=1
$ 49,500.00CDN
Regards,
doug
86 951 (http://www.pcaucr.org/visuals/photos...egory&catid=61)
01 E320 (W210) 4matic Wagon (http://www.benzworld.org/forums/w210...body-do-2.html)
00 540i-6 (http://forums.bimmerforums.com/forum...hp?albumid=976)
94 855 turbo Wagon (sold in 09)
85 535i-5 (sold in 07)
76 300D (sold in 92)
83 944 (sold in 86)
I apparently only buy cars designated by numbers
#447
Addict
Rennlist Member
Rennlist Member
Little offtopic but still, does anybody know what were the spring rates on Bilstein Escort Cup coilovers that came on 944 turbo Cup from factory?
Last edited by Voith; 05-31-2011 at 09:58 AM.
#449
I also vote to leave the carpet. The thing that makes your car so great is it's exactly the way it left the factory instead of being gutted like all the others.
#450
Rennlist Member
Thread Starter
Another year has gone by, I bought my car 24 years ago this weekend. (Had to update my sig today.)
Next year I'll be able to get historical license plates. Yikes!
Next year I'll be able to get historical license plates. Yikes!