'68 911 with LWB, RSR flares, and SC suspension: What's it worth?
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hello all, I wanted to post up some pics and info on my new beauty... it's a shell/roller that the PO spent a lot of time and money on, and then never finished it. It's been in storage for about 10 years in this state. PO is a true Porsche craftsman who builds monocoque race cars from scratch. I can't give more detail than that, but basically his work is nop notch.
I actually really love what he did, although it's probably not for the 911 purist. He started with a '68 911L with a 2.0, used a jig to extend the wheelbase, media blasted all steel repaired all rust, I believe replaced the floor pan, welded in aftermarket steel RSR flares front and rear, seam welded everywhere, primered with aircraft primer and then sealed the whole body. So, no rust anywhere! He then acquired a wrecked SC and put the aluminum suspension and wire harness from it in the '68. It also came with all the glass and chrome trim pieces, a couple boxes of interior pieces, original '68 head and tail lights, and aftermarket fiberglass RSR front and rear bumpers.
His plan was to put the SC 3.0 engine and either a 915 or G50 transaxle in it, a couple race seats and RS door panels, some fresh paint, and it would be a street legal track car. I'm pretty much a fan of that, but I already have a great track car (951 w/ v8 swap). Don't worry; I will not swap a v8 into this one.
So, being new to the 911 world, it would really help me to formulate a plan if I could get an educated estimate of the value of the car as it sits, and what the value might be if I finish it off into an RSR look with an SC 3.0 engine and suspension, and maybe an RS style interior. I'm trying to figure out how much money I can put into it without going upside down... would really like to pull off the impossible scenario of having a car that's worth more that I put into it. I can tell you I acquired it for a very reasonable amount (actually a trade), so I think I'm on the right track so far.
Thanks in advance guys... here are some pics. Try to look past the little 944 cookie cutters.
I actually really love what he did, although it's probably not for the 911 purist. He started with a '68 911L with a 2.0, used a jig to extend the wheelbase, media blasted all steel repaired all rust, I believe replaced the floor pan, welded in aftermarket steel RSR flares front and rear, seam welded everywhere, primered with aircraft primer and then sealed the whole body. So, no rust anywhere! He then acquired a wrecked SC and put the aluminum suspension and wire harness from it in the '68. It also came with all the glass and chrome trim pieces, a couple boxes of interior pieces, original '68 head and tail lights, and aftermarket fiberglass RSR front and rear bumpers.
His plan was to put the SC 3.0 engine and either a 915 or G50 transaxle in it, a couple race seats and RS door panels, some fresh paint, and it would be a street legal track car. I'm pretty much a fan of that, but I already have a great track car (951 w/ v8 swap). Don't worry; I will not swap a v8 into this one.
So, being new to the 911 world, it would really help me to formulate a plan if I could get an educated estimate of the value of the car as it sits, and what the value might be if I finish it off into an RSR look with an SC 3.0 engine and suspension, and maybe an RS style interior. I'm trying to figure out how much money I can put into it without going upside down... would really like to pull off the impossible scenario of having a car that's worth more that I put into it. I can tell you I acquired it for a very reasonable amount (actually a trade), so I think I'm on the right track so far.
Thanks in advance guys... here are some pics. Try to look past the little 944 cookie cutters.
#2
Addict
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looks right so far.
you could be in it another $20-30K to go full tilt RSR. Personally I would go toward a nice lightweight R reproduction. Love this stage of a build.
![jumper](https://rennlist.com/forums/graemlins/jumper.gif)
#4
Rennlist Member
Thread Starter
#5
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So, what do you think it's worth as it sits? And what would it be worth as an "R" reproduction, if done well?
#7
Rennlist Member
Thread Starter
Trending Topics
#8
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What do you guys think about the 915 trans with a 3.0 SC motor? Is it really difficult to get the 915 to shift smoothly, or is it not that big of a deal? I just don't know if a G50 will fit in my budget. I don't plan on racing this, just looking to build a fun street car that is track capable.
#9
Addict
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Don't sweat the 915 trans.
The cool thing about going R is that there are only a few mandatory visuals. It's gotta have the R tail lights (see my avatar) (PM me for details), it's gotta have the rear deck hinges ($100ish at TRE), and it should have a through the hood filler cap (fab'd for far less than TRE is asking
), and does not need crazy wide tires and perfect interiors.
http://www.tremotorsports.com/
http://www.excellence-mag.com/issues...e#.Ur82nfRDuMY
https://www.google.com/search?q=911R...6%3B1000%3B665
The cool thing about going R is that there are only a few mandatory visuals. It's gotta have the R tail lights (see my avatar) (PM me for details), it's gotta have the rear deck hinges ($100ish at TRE), and it should have a through the hood filler cap (fab'd for far less than TRE is asking
![EEK!](https://rennlist.com/forums/images/smilies/eek.gif)
http://www.tremotorsports.com/
http://www.excellence-mag.com/issues...e#.Ur82nfRDuMY
https://www.google.com/search?q=911R...6%3B1000%3B665
#10
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you saw what original '68 911L coupes are going for in original condition you'd likely go find the guy you bought this car from and give him a swift kick!
That being said the quality of his work appears nice from my perspective so welcome to the fold .
Your decision now is are you going to keep this direction or go back with something more
in vogue err narrow.
The value now is likely about what you paid zilch or less although good rust free rollers are
Becoming harder and harder to find most have eighties updates like yours.
Without the flairs they seem to be reaching 5-7500 ..lots or R wannabes and revinned
911 coupes I guess , I' m vaguely looking for one myself, haha Bert
That being said the quality of his work appears nice from my perspective so welcome to the fold .
Your decision now is are you going to keep this direction or go back with something more
in vogue err narrow.
The value now is likely about what you paid zilch or less although good rust free rollers are
Becoming harder and harder to find most have eighties updates like yours.
Without the flairs they seem to be reaching 5-7500 ..lots or R wannabes and revinned
911 coupes I guess , I' m vaguely looking for one myself, haha Bert
#11
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
As nice as his work may be, the value of the roller is minimal, if for no other reason than he stretched it. I'd never consider a 911 of any sort that had the body length altered. I think I'd have a LOT of company in that thought, so your resale market is severely limited, if that is your concern on value.
#12
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
As nice as his work may be, the value of the roller is minimal, if for no other reason than he stretched it. I'd never consider a 911 of any sort that had the body length altered. I think I'd have a LOT of company in that thought, so your resale market is severely limited, if that is your concern on value.
Thanks for your honest appraisals, guys.
#14
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
IMHO given that the car will never be original, it's highest value is likely to be someone who wants a quality DE/DD car. Similar to what it sounds like you were looking for. I think for a well turned out and sorted car there is a good market. I know several folks that have current GT3's and RS's who are looking. To get the car that draws real interest the right track oriented setup is important. It won't be cheap, but you and the next owner can really enjoy it. Think Singer on a budget.
#15
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
IMHO given that the car will never be original, it's highest value is likely to be someone who wants a quality DE/DD car. Similar to what it sounds like you were looking for. I think for a well turned out and sorted car there is a good market. I know several folks that have current GT3's and RS's who are looking. To get the car that draws real interest the right track oriented setup is important. It won't be cheap, but you and the next owner can really enjoy it. Think Singer on a budget.