When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
THANKS! I think this will be my first official purchase for my CGTS on order.
Originally Posted by Adrift
Thanks! I used to just muscle them on, but I’m older now. lol
Wheels are SO wide nowadays, you really need these. They help SO much! I carry one in my GT350 and another stays in the garage. Without them, the inside of the rims get all scratched up so easily.
Agreed! But the ones referenced there are too short. The ones I got cost a little more for a pair but are safer at close to a 6" length. Even the owner's manual recommends a pair for PCCBs, although I used a pair on my steel brakes previously too. Those Suncoast ones are fine too. Be sure to get the ones with the holes where you can place a rod/Phillips screwdriver to help turn it more easily if it gets a little stubborn.
Here are the ones I got from Amazon
Yes, whichever you choose just has to have the M14 x P1.5 sizing and be long enough for the wheel to clear the brakes well. The ~6" size is about as long as I could find.
That is good for all modern Porsches. As the Suncoast site calls out: "Fits all Boxster, Cayman, Panamera, Cayenne, Macan, and 911 Carrera models (1999 or newer). except centerlocks"
Ordered a Bordeaux Red Leather Console Lid with Crest from Suncoast to get rid of the black alcantara console lid in my Gt Silver with Classic (Bordeaux/Black) interior Spyder.
Seal looks great. Eight screws to remove and the lid casing pops off the lower half of the lid. No regrets.
pp
License plate brackets from Tom from his site (see pic).
Great product, super easy installation. License plate now floats just a bit off the bumper, but isn’t really noticeable. I actually prefer this as my license plate frame now doesn’t press into the bumper. Included bolts thread into the brackets perfectly, and can remove the plate as many times as desired without fear of wearing out the plastic bumper holes.
License plate brackets from Tom from his site (see pic).
Great product, super easy installation. License plate now floats just a bit off the bumper, but isn’t really noticeable. I actually prefer this as my license plate frame now doesn’t press into the bumper. Included bolts thread into the brackets perfectly, and can remove as many times as desired without fear of wearing out the plastic bumper holes.
09-03-2021, 12:25 PM
