Notices
718 GTS 4.0/GT4/GT4RS/Spyder/25th Anniversary Discussions about the 718 version of the GT4RS, GTS 4.0, GT4, Spyder and 25th Anniversary Boxster
Sponsored By:
Sponsored By: Cobb

What did you buy your 718 today?

Thread Tools
 
Search this Thread
 
Old 01-02-2022, 11:41 AM
  #496  
Westcoast
RL Community Team
Rennlist Member
 
Westcoast's Avatar
 
Join Date: Dec 2019
Location: Victoria, BC, Canada
Posts: 9,141
Received 4,659 Likes on 2,712 Posts
Default

Originally Posted by jwr9152
Did a couple of things. Installed an Antigravity battery. Installed a Guru rack so I can tow a trailer to the track. I know most people will hate it, but I like driving to the track and this allows me to bring my track tires and more tools. Tows great and easy install for the hitch. The wiring on the other and was a pain. Basically had to strip the entire interior. Had to run the brake light to the third brake light, and the tail lights to the license plate light, and of course the turn signals to each tail light.

Also installed a Recaro Podium. Only weighs 13 pounds. I mounted it using a BBi autosport base, which weighs 15 pounds. Bought an extra seat belt harness that plugs right into the oem wiring harness, so no seat belt warning. I also swapped over the position sensor, but still getting the airbag light. Local shop thinks they can code it out, so we will see next week, when it's there getting stiffer springs installed and realigned. Seat is very comfortable. It sits lower and gives me more leg room, which at 6-4 it really helps. I'll know for sure in a few weeks how comfortable it is, after an 8 hour drive to Sebring. Still waiting on my roll bar to install my harness. Should be good to go after that.
You mention this:
Installed a Guru rack so I can tow a trailer to the track.
Their webpage (if I got the right place) just shows a bike rack, where did you get the hardware that actually provides a hitch on the car?

​​​​​​​Thanks!
Old 01-02-2022, 01:12 PM
  #497  
jwr9152
Burning Brakes
 
jwr9152's Avatar
 
Join Date: Apr 2017
Posts: 864
Received 353 Likes on 228 Posts
Default

Originally Posted by Westcoast
You mention this:

Their webpage (if I got the right place) just shows a bike rack, where did you get the hardware that actually provides a hitch on the car?

​​​​​​​Thanks!
Sure. Like I mentioned before, they weld a 1-1/4" receiver to a plate and bolt that to your bumper beam. You can use the receiver for whatever you want like a bike rack or a trailer hitch.


I bought a 1-1/4" trailer ball mount from Uhaul


My car is in the shop getting an alignment, but here is a picture of another 718 with the same set up.


The following users liked this post:
Adrift (01-02-2022)
Old 01-02-2022, 01:20 PM
  #498  
Russv
Instructor
 
Russv's Avatar
 
Join Date: Jan 2021
Location: Northern California
Posts: 143
Received 157 Likes on 59 Posts
Default

Delete

Last edited by Russv; 01-02-2022 at 01:32 PM. Reason: Delete
Old 01-02-2022, 01:34 PM
  #499  
Russv
Instructor
 
Russv's Avatar
 
Join Date: Jan 2021
Location: Northern California
Posts: 143
Received 157 Likes on 59 Posts
Default

Originally Posted by AdamIsAdam
First night at home and did the following...


Baby needs a bib.



Clear markers.



Plastic storage and battery tender.



Tray and net.



Radar detector mount. Hard wiring is next.
Phone mounted too.




Not sure which setup I like better.



License plate bracket mounted. (Craig's)
Where did you get the bib? It’s a must have!
Old 01-02-2022, 01:41 PM
  #500  
AdamIsAdam
Rennlist Member
 
AdamIsAdam's Avatar
 
Join Date: Sep 2011
Location: Long Island, NY
Posts: 3,997
Received 3,971 Likes on 1,722 Posts
Default

Originally Posted by Russv
Where did you get the bib? It’s a must have!
Someone on here found this company.

https://www.themarrk.com/gallery-fuel-flap-photos

https://www.facebook.com/watch/?v=626122861610298
The following users liked this post:
Russv (01-02-2022)
Old 01-02-2022, 01:50 PM
  #501  
808c2s
Burning Brakes
 
808c2s's Avatar
 
Join Date: Aug 2007
Location: Hawaii
Posts: 1,022
Received 461 Likes on 188 Posts
Default

Originally Posted by AdamIsAdam
I am pretty sure that's where the Bib is ordered from. I got one and it's the round one. Fits nicely in the oval opening of the Spyder.
The following users liked this post:
Russv (01-02-2022)
Old 01-02-2022, 02:07 PM
  #502  
Westcoast
RL Community Team
Rennlist Member
 
Westcoast's Avatar
 
Join Date: Dec 2019
Location: Victoria, BC, Canada
Posts: 9,141
Received 4,659 Likes on 2,712 Posts
Default

Originally Posted by jwr9152
Sure. Like I mentioned before, they weld a 1-1/4" receiver to a plate and bolt that to your bumper beam. You can use the receiver for whatever you want like a bike rack or a trailer hitch.


I bought a 1-1/4" trailer ball mount from Uhaul


My car is in the shop getting an alignment, but here is a picture of another 718 with the same set up.

Thanks for the details and the pictures.
The following users liked this post:
jwr9152 (01-02-2022)
Old 01-02-2022, 07:11 PM
  #503  
808c2s
Burning Brakes
 
808c2s's Avatar
 
Join Date: Aug 2007
Location: Hawaii
Posts: 1,022
Received 461 Likes on 188 Posts
Default

Name:  photo584.jpg
Views: 1088
Size:  1.99 MB
The following 2 users liked this post by 808c2s:
Dan Nagy (01-02-2022), Russv (01-02-2022)
Old 01-02-2022, 07:25 PM
  #504  
Russv
Instructor
 
Russv's Avatar
 
Join Date: Jan 2021
Location: Northern California
Posts: 143
Received 157 Likes on 59 Posts
Default

Originally Posted by 808c2s
Just ordered one!
The following users liked this post:
808c2s (01-07-2022)
Old 01-02-2022, 07:35 PM
  #505  
808c2s
Burning Brakes
 
808c2s's Avatar
 
Join Date: Aug 2007
Location: Hawaii
Posts: 1,022
Received 461 Likes on 188 Posts
Default

Originally Posted by Russv
Just ordered one!
Yessss!
Old 01-02-2022, 11:08 PM
  #506  
Adrift
Rennlist Member
 
Adrift's Avatar
 
Join Date: Nov 2008
Location: North of Dallas
Posts: 3,810
Received 2,491 Likes on 1,278 Posts
Default

This thread can cost someone a lot of money. lol (That is intended as a compliment to all the awesome ideas)
The following users liked this post:
Jeff Jones (01-02-2022)
Old 01-02-2022, 11:11 PM
  #507  
Adrift
Rennlist Member
 
Adrift's Avatar
 
Join Date: Nov 2008
Location: North of Dallas
Posts: 3,810
Received 2,491 Likes on 1,278 Posts
Default

@jwr9152 Sorry if this is a dumb question, but what all has to happen to get them your bumper beam? Did you remove that yourself? Get a shop to do it? And then I guess you find a big *** box and just ship it wrapped in bubble wrap...?
The following users liked this post:
r2thek (03-03-2022)
Old 01-02-2022, 11:35 PM
  #508  
Frank Torres
Instructor
 
Frank Torres's Avatar
 
Join Date: Dec 2020
Location: Lake Hopatcong NJ
Posts: 247
Received 333 Likes on 113 Posts
Default

Originally Posted by Westcoast
Very nice, where from?
local guy made it for me.
Old 01-07-2022, 08:31 PM
  #509  
StormRune
Rennlist Member
 
StormRune's Avatar
 
Join Date: Nov 2013
Location: Austin, TX
Posts: 4,069
Received 671 Likes on 359 Posts
Default

When I configured the car, I opted to go with black for the Porsche logo since the silver option would be the only silver on the car (other than inside the headlights). I would have preferred an option for it to be body-colored but that wasn't offered.

So I spent $10 to pick up a small roll of car vinyl film that is pretty much a match for Shark Blue and painstakingly cut out letters for the logo. I've ended up with this. I'll have to see how well it holds up. The cutouts aren't quite perfect but at any distance they seem good enough..

Application was helped by the film being made so that it has to be set with a heat gun once in stuck in place. I doubt they would hold up to a pressure wash but then again I'll never do that anyway. I pulled one back off after a while to replace it with a more cleanly cut one and the first one seemed to be holding pretty well.

To make the letters, I hunted down a good image of the official PORSCHE logo and then kept reprinting it at various scales until the letter sizes matched those on the rear of the car. Then I used those as stencils.

Here's the overall look and a closeup of one of the letters. The color variation in the letter is just from the reflections off the glossy surface.





Edit: I'm attaching the logo I used as the template for the letters in case others want to give it a try. On my printer I had to scale it to 21% and they matched right up. That will vary for everyone.



Last edited by StormRune; 01-07-2022 at 08:45 PM.
The following 12 users liked this post by StormRune:
Dan Nagy (01-07-2022), JBM718GTS (01-09-2022), Jeff Jones (01-07-2022), kwikit356 (01-07-2022), l30thelion (03-27-2023), Lucent (01-07-2022), mc3456 (08-17-2022), nothingman (05-30-2022), OKCabriolet (03-26-2024), slilley (01-08-2022), T i h o r (01-08-2022), TripleL (01-12-2022) and 7 others liked this post. (Show less...)
Old 01-07-2022, 08:34 PM
  #510  
Westcoast
RL Community Team
Rennlist Member
 
Westcoast's Avatar
 
Join Date: Dec 2019
Location: Victoria, BC, Canada
Posts: 9,141
Received 4,659 Likes on 2,712 Posts
Default

^^^ Nicely done, much better than silver, and for your car matching the body colour was a great move!

Last edited by Westcoast; 01-07-2022 at 08:57 PM.
The following users liked this post:
Lucent (01-07-2022)


Quick Reply: What did you buy your 718 today?



All times are GMT -3. The time now is 07:16 PM.