Side Air Intake Grills: Available
#106
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Yes, the heat that exits these vents after driving turned the supple leaves in my pic into a dried crisp in minutes.
Also, @RGS IMHO, you might want to update your logo when you run out of stock to your orange letters “in front” of a black honeycomb grill instead of lines.
Just a thought…
Also, @RGS IMHO, you might want to update your logo when you run out of stock to your orange letters “in front” of a black honeycomb grill instead of lines.
Just a thought…
__________________
The following users liked this post:
slilley (10-22-2021)
#108
Burning Brakes
#109
Rennlist Member
@kk2 We have a customer having issues removing the side intake trim piece, any insights?
#110
@SpeedySpidey Thanks for the idea and check out the logo, how does it look?
The following users liked this post:
RGS (10-22-2021)
#111
Rennlist Member
My friend just installed his side grills on a new CGTS40 and I think it looks GREAT and wanted to share.
#112
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#113
Rennlist Member
Has anyone experienced the oem grill falling off after doing this? My friend just lost his while driving. Didn't realize it fell off until arriving at destination. The PPF installer did the work and it seemed tight when the job was done.
Is there 3M tape on the 718s that should be used?
Any suggestions welcome.
Is there 3M tape on the 718s that should be used?
Any suggestions welcome.
#114
Rennlist Member
Thread Starter
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,526
Likes: 0
Received 3,447 Likes
on
2,357 Posts
My PPF installed put mine back on after they were taken off for the side scoops to be wrapped and I noticed one would pop out a little at times so I used some 3M tape on the bottom to secure it so I assume you could add a little here and there.
#116
Rennlist Member
I didn’t even lift the car or take the wheels off.
#117
Thanks to Eric at the Radiator Grill Store (https://www.radiatorgrillstore.com/) for developing these for us, the only one that actually makes these. Not only do they prevent rocks and other debris from entering the air intakes but they look factory made. And they are very easy to install: remove your factory intake pieces, which is very easy and takes less than a minute; here is a video to help you remove them:
https://www.youtube.com/watch?v=IWPQ...torGrilleStore
I have a 2021 Spyder and opted to replace the factory intake piece with the 2 pieces that come on the GT4 but they work with the factory piece as well on the Spyder and GT4. Once your remove the factory intake piece simply place the grill in first and reinstall the factory pieces. I posted some pictures below and will post more when I get it out of the garage next time - I just got the car a few days ago.
If you have any questions feel free to contact Eric (radiatorgrills@gmail.com) and he will get right back to you....a great guy who strives on delivering a high-quality product for us in the Porsche community, and many other makes/models as well. I can also help answer questions so PM me if so since I would be happy to help since I really like these since the quality and fitment is great.
https://www.youtube.com/watch?v=IWPQ...torGrilleStore
I have a 2021 Spyder and opted to replace the factory intake piece with the 2 pieces that come on the GT4 but they work with the factory piece as well on the Spyder and GT4. Once your remove the factory intake piece simply place the grill in first and reinstall the factory pieces. I posted some pictures below and will post more when I get it out of the garage next time - I just got the car a few days ago.
If you have any questions feel free to contact Eric (radiatorgrills@gmail.com) and he will get right back to you....a great guy who strives on delivering a high-quality product for us in the Porsche community, and many other makes/models as well. I can also help answer questions so PM me if so since I would be happy to help since I really like these since the quality and fitment is great.
#118
Rennlist Member
So, my BGTS has side vent screens already, just back a little further. Are you adding an additional screen, or are the screens that I am seeing something that was added to ‘22 models? I bought the screens before I received the car but don’t know why I would add them at this point.
#119
Rennlist Member
So, my BGTS has side vent screens already, just back a little further. Are you adding an additional screen, or are the screens that I am seeing something that was added to ‘22 models? I bought the screens before I received the car but don’t know why I would add them at this point.
AFIAK all the 718's have an OEM "screen" set further back in the intakes, however the "mesh" on those is fairly coarse and thus some material can be ingested, the RGS screens are finer - and thus your are unlikely to ingest a cigarette butt etc...
#120
Rennlist Member
photos of the OEM screen you are referring to?
AFIAK all the 718's have an OEM "screen" set further back in the intakes, however the "mesh" on those is fairly coarse and thus some material can be ingested, the RGS screens are finer - and thus your are unlikely to ingest a cigarette butt etc...
AFIAK all the 718's have an OEM "screen" set further back in the intakes, however the "mesh" on those is fairly coarse and thus some material can be ingested, the RGS screens are finer - and thus your are unlikely to ingest a cigarette butt etc...