718 GT4 Dyno Results: Before & After Mods (SOUL & Softronic ECU)
#91
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,537
Likes: 0
Received 3,461 Likes
on
2,362 Posts
I wonder what gains I will see on the Spyder with Soul Street Header/high flow cats and Soul Resonated Race Exhaust? Only one way to tell!
#92
Hey Scott, the car has an 8000 rpm redline and cut-out. No doubt your graphs end at 7600 because you convert from speed. Can I suggest you use a dynojet with the direct RPM (logged off the ECU) option.
#93
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Those are not my graphs yet the OP's runs in 3rd gear data with a smoothing rate of 5 instead of 3. The 4th gear does show 7600 instead of 8k in which would be from the speed to RPM conversion yet they were run to 8k and part of the whole thing on dyno's and how they are used etc.
Best,
Scott
__________________
Softronic - Porsche Performance Software Tuning
Faster than a speeding bullet.
Cayman | Boxster | 911 | Cayenne
24HRS Daytona Winners programmed by Softronic!
Porsche Interseries programmed along with teamed owned Tudor and World Challenge cars in an exclusive with Softronic.
Porsche PCA racing binary check by Softronic for compliance.
Softronic - Porsche Performance Software Tuning
Faster than a speeding bullet.
Cayman | Boxster | 911 | Cayenne
24HRS Daytona Winners programmed by Softronic!
Porsche Interseries programmed along with teamed owned Tudor and World Challenge cars in an exclusive with Softronic.
Porsche PCA racing binary check by Softronic for compliance.
Last edited by Softronic; 09-16-2021 at 10:43 AM. Reason: Added 4th Gear
#94
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Originally Posted by Bob Z.
I wonder what gains I will see on the Spyder with Soul Street Header/high flow cats and Soul Resonated Race Exhaust? Only one way to tell!
#95
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I wanted to let everyone know we are flashing the 718 GT4, Spyder,GTS,992TT and the 992 all by the OBD port. You do NOT have to remove the DME.
Best,
Scott
Best,
Scott
The following 4 users liked this post by Softronic:
HooosierDaddy (12-11-2021),
Soul Performance (12-10-2021),
Tay101 (12-10-2021),
X2Board (12-10-2021)
#97
#98
Rennlist Member