Urgent Request - Build Advice/=
#31
RL Community Team
Rennlist Member
Rennlist Member
Here's a cheaper alternative that looks OEM: https://shop.db-carbon-interieur.de/...s/1151G42-0001
Can also get it in alcantara for the same price as Suncoast: https://shop.db-carbon-interieur.de/...s/1621G42-0001
Don't think I've seen a CF alcantara shift **** outside of the link above.
Can also get it in alcantara for the same price as Suncoast: https://shop.db-carbon-interieur.de/...s/1621G42-0001
Don't think I've seen a CF alcantara shift **** outside of the link above.
Damn, another mod to think about before the car has even been delivered!
#32
Already on it; emailed these guys to see what they can do on colours. I have the white gauges so I'm hopeful they can have the shift pattern in white like the leather one but yellow stitching on the boot. Will let you know what they say when I hear back.
The following users liked this post:
Westcoast (05-13-2020)
#33
That is the reason I didn’t end up getting it. I have an Audi S5 for daily driving with CF trim and don’t really likely -As you pointed out I find it a bit flat and fake and that is why I opted for the leather.
#34
I'm looking at getting the anthracite brushed aluminum for the interior, but wondering if you can get the door sills in in brushed aluminum also? Configurator doesn't say anything if they will match it. If not, would it be better to skip, or go for leather / carbon fiber?
Anyone get leather and have a photo of it? Configurator doesn't have one. Assume that wouldn't wear very well.
Also there is no way to customize the shift lever material also, to make it anthracite?
Anyone get leather and have a photo of it? Configurator doesn't have one. Assume that wouldn't wear very well.
Also there is no way to customize the shift lever material also, to make it anthracite?
#35
I just found out that my freeze date got pulled in by a month and I need to finalize my build. I currently specc'd carbon fiber interior, but I'm waffling between anthracite. Anyone have good pictures of either?
Also, anyone have a picture of black PCCB calipers on platinum wheels?
Also, anyone have a picture of black PCCB calipers on platinum wheels?
#36
I'm looking at getting the anthracite brushed aluminum for the interior, but wondering if you can get the door sills in in brushed aluminum also? Configurator doesn't say anything if they will match it. If not, would it be better to skip, or go for leather / carbon fiber?
Anyone get leather and have a photo of it? Configurator doesn't have one. Assume that wouldn't wear very well.
Also there is no way to customize the shift lever material also, to make it anthracite?
Anyone get leather and have a photo of it? Configurator doesn't have one. Assume that wouldn't wear very well.
Also there is no way to customize the shift lever material also, to make it anthracite?
#37
Don't get carbon fibre
1) The cf weave is way different than the seats, looks almost fake IMO
2) The glossy plastic surface looks really bad with Alcantara. I think it looks much better with leather like on the seats. The aluminum is way more classy looking.
1) The cf weave is way different than the seats, looks almost fake IMO
2) The glossy plastic surface looks really bad with Alcantara. I think it looks much better with leather like on the seats. The aluminum is way more classy looking.
#38
So the leather was a good decision then
#39
RL Community Team
Rennlist Member
Rennlist Member
#40
Burning Brakes
By the way, the email response from the company is excellent, they responded to my requests quickly.
#41
did you receive your spyder?
im trying to decide leather interior trim or doing the brushed aluminum 👌
ordering LWBS with full leather and rodium silver stichting
#42
Sorry unfortunately it’s a national holiday today -rare it falls in the middle of the week - so I don’t expect it to arrive at dealership until tomorrow- hoping to have keys by weekend.
The following users liked this post:
HawkerDriver (07-04-2020)
#43
Race Director
Thread Starter
Here you go. Pretty sure this is leather.
The following users liked this post:
HawkerDriver (07-04-2020)
#44
RL Community Team
Rennlist Member
Rennlist Member
There is an early YouTube review out there that shows the leather trim pretty well. I was originally considering it until I saw that review and some other pics. It just looked dull and dark, too much of the same tone in the interior.
Here you go. Pretty sure this is leather.
https://youtu.be/2Gt_LrlQsAU
Here you go. Pretty sure this is leather.
https://youtu.be/2Gt_LrlQsAU
Although I had seen this video review before it was a good replay, I will reserve judgment on the exhaust until I drive my own Spyder, but this one sounded very quiet...
The following users liked this post:
HawkerDriver (07-04-2020)
#45
There is an early YouTube review out there that shows the leather trim pretty well. I was originally considering it until I saw that review and some other pics. It just looked dull and dark, too much of the same tone in the interior.
Here you go. Pretty sure this is leather.
https://youtu.be/2Gt_LrlQsAU
Here you go. Pretty sure this is leather.
https://youtu.be/2Gt_LrlQsAU
i appreciate the video!
hard to tell as it could be the Black Brushed Alumnium as well.
Either way, I think CF or the normal brushed aluminium trim would look better and provide some contrast in the cabin.