Craigslist PORSCHE 1994 3.6 SPEEDLINE WHEELS - MINT - $4500 (KY)
#1
Race Car
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
WILL THESE FIT A NB 993?
Not mine, but I would be willing to go and have a lookie and or help in the transaction. Seems like a nice set.
http://cincinnati.craigslist.org/pts/1046962359.html
Not mine, but I would be willing to go and have a lookie and or help in the transaction. Seems like a nice set.
http://cincinnati.craigslist.org/pts/1046962359.html
#2
#3
Race Car
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know these wheels are worth a lot, but is the $4500.00 too high? I am not interested I just got new wheels. will they fit the NB 993?
Mike
Mike
#4
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Depending on your right height and alignment you may need to roll the rear fenders slightly but yes, they will fit. IIRC you will be repainting the car? If so then I would go ahead and trim and roll the fenders even if you don't need the clearance now...you may decide to run more aggressive offets/sizes in the future.
![burnout](https://rennlist.com/forums/graemlins/burnout.gif)
Trending Topics
#8
Race Car
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Tim:
I'm not listening to you, I'm not listening to you, I'm not listening to you, I'm not listening to you, I'm not listening to you, I'm not listening to you
CP
I do not want them, I do not want them, I do not want them, I do not want them, I do not want them, I do not want them
Mike
I'm not listening to you, I'm not listening to you, I'm not listening to you, I'm not listening to you, I'm not listening to you, I'm not listening to you
CP
I do not want them, I do not want them, I do not want them, I do not want them, I do not want them, I do not want them
Mike
#11
Rennlist Member
Join Date: Apr 2006
Location: Rainforest (Vancouver, BC)
Posts: 7,573
Received 1,034 Likes
on
464 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm not 100% on this but I believe that the 964 Turbo 3.6 Speedlines had a 61mm offset on the rears. This compares to the 65mm offset of the 993RS Speedlines. I think they'd fit. Mr Verburg would know for sure.
Did I mention Speedlines would look super duper on your RB cab? Not quite the same but you get the idea;
Did I mention Speedlines would look super duper on your RB cab? Not quite the same but you get the idea;
#13
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Fronts should be fine.
You should ask the seller about the rear offset. If the wheels are as original, the offset should be etch on one side of the valve stem, opposite of the width. If the offset is 65mm, you are good with your NB 993.
If you pass on these wheels, please post the rear offset answer.
Thanks !
You should ask the seller about the rear offset. If the wheels are as original, the offset should be etch on one side of the valve stem, opposite of the width. If the offset is 65mm, you are good with your NB 993.
If you pass on these wheels, please post the rear offset answer.
Thanks !
#14
Race Car
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The size is listed in the auction. See this post.
https://rennlist.com/forums/6370862-post2.html
I really don't want them I was just posting for others that may be interested and they are close enough to my house that I could assist in the transaction and make sure the buyer has their interest covered.
Mike
https://rennlist.com/forums/6370862-post2.html
I really don't want them I was just posting for others that may be interested and they are close enough to my house that I could assist in the transaction and make sure the buyer has their interest covered.
Mike