Gauge mod questions for those who have already done so:
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Assuming black dash with grey leather int. (Arctic ext.):
Alu rings?
White or alu faces?
Both?
Any pics would be helpful.
TIA
Alu rings?
White or alu faces?
Both?
Any pics would be helpful.
TIA
#7
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I got those same gauge rings (from the first pictures above) and love them. The only cover the inner portion of the bezel, so they are not overpowering. As you will see from the last group buy thread, the vendor was www.armaturenringe.de/. No affiliation, etc.
Trending Topics
#9
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Marc Shaw
Brushed aluminum gauge rings (new tach. too). I am not partial to white gauge faces.
Marc
Marc
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#12
Super Duper Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by pcar964
Did you purposely get a guage face with 7000+rpm redline, or was that the only one available in that style? Looks nice, you don't have to rotate the tach with that thing ![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
I bought a used tach from a wrecker and NH Speedometer did the "face lift". While the redline is at 7200 (not 6800), at least I can see when I am getting close to time to shift.
I had rotated my tach before but found the turn-signal indicator lights pointing up and down looked "kludgy".
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Marc
p.s. Perhaps I'll spring for some titanium con-rods, valve springs, etc. and re-chip it to a 7200 redline.
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)