Rennlist - Porsche Discussion Forums
0 2025/07/09 13:07:44
Pic 1 of rotation
Pic 1 of rotation
0 2025/07/10 13:16:32
Pic 2 of rotation
Pic 2 of rotation
0 2025/07/10 13:16:37
Pic 3 of rotation
Pic 3 of rotation
0 2025/07/10 13:16:42
Given the color difference of these two contacts, are they the “stop point” for the rotation up/down?
Given the color difference of these two contacts, are they the “stop point” for the rotation up/down?
0 2025/07/10 13:16:45
0 2025/07/10 13:44:36
Cleaned and de-oxit
Cleaned and de-oxit
0 2025/07/11 13:46:36
Reconnected wires to test. Nothing. Lights don’t come on, motor does nothing
Reconnected wires to test. Nothing. Lights don’t come on, motor does nothing
0 2025/07/11 13:46:43
Note 3 screws to mount to chassis, 1 for arm to motor and 1 for ground
Note 3 screws to mount to chassis, 1 for arm to motor and 1 for ground
0 2025/07/14 16:06:45
Not looking goid
Not looking goid
0 2025/07/14 16:06:49
Yikes!
Yikes!
0 2025/07/14 16:06:52
Before
Before
0 2025/07/16 16:05:54
After
After
0 2025/07/16 16:05:58
It looks like this. There is one on the right as well that controls wiper delay.
It looks like this. There is one on the right as well that controls wiper delay.
0 2025/07/25 08:50:45
0 2025/09/07 05:05:50
0 2025/09/07 05:05:56
0 2025/09/07 05:05:53
Wiring diagram is on the top of the unit. Wires(except speaker)included.
Wiring diagram is on the top of the unit. Wires(except speaker)included.
0 2025/09/07 05:06:01
Identification of the wires to the tachometer
Identification of the wires to the tachometer
0 2025/09/16 14:23:49
0 2025/09/17 17:15:03
0 2025/09/17 17:14:54
0 2025/09/17 17:15:05
0 2025/09/17 17:15:00
0 2025/09/17 17:15:02
0 2025/09/17 17:14:56
I did see a green wire on the 2nd pin from the top(green) and it goes to the screw circled which connects to the tach unit.
I did see a green wire on the 2nd pin from the top(green) and it goes to the screw circled which connects to the tach unit.
0 2025/09/17 17:15:22
0 2025/09/17 17:14:59
You can see the copper band. It’s thickness never changes with moving the needle.
You can see the copper band. It’s thickness never changes with moving the needle.
0 2025/09/22 14:41:17
Better view of it on the spare.
Better view of it on the spare.
0 2025/09/22 14:41:20
Front grill slat $15 Rear tail light $20
Front grill slat $15 Rear tail light $20
0 2025/09/22 16:40:22
Light has crack thru turn signal light
Light has crack thru turn signal light
0 2025/09/22 16:40:27
Filled(polyvance) & sanded for recovering
Filled(polyvance) & sanded for recovering
0 2025/09/22 16:40:32
Pod ready to recover $100
Pod ready to recover $100
0 2025/09/22 16:40:29
Picture from Pumpkin muffler to single mid muffler.
Picture from Pumpkin muffler to single mid muffler.
0 2025/10/22 05:49:28
Arm
Arm
0 2025/12/11 18:05:18
When i removed the headlight motor, the rust made my motor lose contact and it made the lights not stay up.
When i removed the headlight motor, the rust made my motor lose contact and it made the lights not stay up.
0 2025/12/11 18:05:22
Cleaned up
Cleaned up
0 2025/12/11 18:10:03
0 2026/01/18 17:58:07
0 2026/01/18 18:01:08
0 2026/02/12 07:17:23