Rennlist - Porsche Discussion Forums
This was how I received it.
This was how I received it.
0 2025/03/07 17:17:44
0 2025/03/22 04:59:47
0 2025/03/22 05:00:12
0 2025/03/22 05:00:28
First look. Electrical tape and some odd wires spliced in. Also, one wire tied into the wiring directly. More to come.
First look. Electrical tape and some odd wires spliced in. Also, one wire tied into the wiring directly. More to come.
0 2025/03/25 17:36:48
First one. Traced the two grey wires. One goes to the 15amp fuel pump/O2 sensor fuse, then to U15. Other goes to pin Q14, which goes to U15. They are connected as they should be, but oddly rather than connecting thru U15 plug it’s all taped together!?
First one. Traced the two grey wires. One goes to the 15amp fuel pump/O2 sensor fuse, then to U15. Other goes to pin Q14, which goes to U15. They are connected as they should be, but oddly rather than connecting thru U15 plug it’s all taped together!?
0 2025/03/25 17:40:48
0 2025/03/25 17:48:24
0 2025/03/25 17:49:13
Pin missing from the plug
Pin missing from the plug
0 2025/03/25 17:49:42
Reset pin
Reset pin
0 2025/03/25 17:49:44
Wire was simply twisted and wrapped?! W14 to XVI Relay(EZF)87 Hooked up properly, but no idea why this was done. W14 out goes to LH18 & EZF25
Wire was simply twisted and wrapped?! W14 to XVI Relay(EZF)87 Hooked up properly, but no idea why this was done. W14 out goes to LH18 & EZF25
0 2025/03/25 17:51:38
Red to grey twisted together and wrapped. Red wire H25 connected to Grey XV(87)
Red to grey twisted together and wrapped. Red wire H25 connected to Grey XV(87)
0 2025/03/25 18:06:57
Here is my confusion
Here is my confusion
0 2025/03/25 18:07:00
0 2025/03/25 18:38:42
0 2025/03/25 18:40:48
0 2025/03/25 18:42:05
Here is the CE panel and note relay XV & XVII
Here is the CE panel and note relay XV & XVII
0 2025/03/26 14:42:22
Here is their pin out numbers
Here is their pin out numbers
0 2025/03/26 14:42:31
Here is what it shows in SM for 86’
Here is what it shows in SM for 86’
0 2025/03/26 14:42:34
Here is what I have
Here is what I have
0 2025/03/26 14:42:37
I’m assuming this is procedure?
I’m assuming this is procedure?
0 2025/03/30 17:46:12
0 2025/03/31 12:36:57
Marked it, moved it slightly right, re-tightened.
Marked it, moved it slightly right, re-tightened.
0 2025/03/31 14:16:13
0 2025/04/05 11:24:09
Already off, which seems to be a big deal to do, so that’s helpful
Already off, which seems to be a big deal to do, so that’s helpful
0 2025/04/28 15:29:59
New insert bushing
New insert bushing
0 2025/04/28 15:30:02
Removed the (2) 8mm screws on the small heat shields. Passenger side
Removed the (2) 8mm screws on the small heat shields. Passenger side
0 2025/04/29 17:25:56
Remove (4) 13mm screws that hold cross mount
Remove (4) 13mm screws that hold cross mount
0 2025/04/29 17:25:57
Once removed, you can reach around both sides(like a bear hug) and use your fingers to unscrew the ball cup
Once removed, you can reach around both sides(like a bear hug) and use your fingers to unscrew the ball cup
0 2025/04/29 17:25:59
Mine was clearly shot
Mine was clearly shot
0 2025/04/29 17:26:00
Used a pic to remove, be sure to get under the lip. Cleaned it out with my dremmel
Used a pic to remove, be sure to get under the lip. Cleaned it out with my dremmel
0 2025/04/29 17:26:02
0 2025/04/29 17:26:03
Removed the (2) 8mm on small heat shields. Drivers side
Removed the (2) 8mm on small heat shields. Drivers side
0 2025/04/29 17:26:05
Take a pic, so you can count the threads for re-install. I also put some white paint on the threads
Take a pic, so you can count the threads for re-install. I also put some white paint on the threads
0 2025/04/29 17:26:07
Two zip ties
Two zip ties
0 2025/05/01 16:41:47
0 2025/05/14 15:04:58
0 2025/05/14 15:05:02
0 2025/05/14 15:05:06
0 2025/05/14 15:06:13
0 2025/07/08 14:02:23