Rennlist - Porsche Discussion Forums
0 2021/01/29 14:51:56
0 2021/01/29 14:52:09
Knock sensor: This is the main offender for my CEL
Knock sensor: This is the main offender for my CEL
0 2021/02/06 06:40:07
Knock sensor: But this one wasn't far behind
Knock sensor: But this one wasn't far behind
0 2021/02/06 06:40:12
Temperature sensor; I don't really know what's hiding under that shrink wrap stuff. It's a real pain to take off.
Temperature sensor; I don't really know what's hiding under that shrink wrap stuff. It's a real pain to take off.
0 2021/02/06 06:40:17
Injector connector: Looking pretty good, tbh
Injector connector: Looking pretty good, tbh
0 2021/02/06 06:40:22
These connector numbers correspond to a Google Sheets document that I'll share in a follow up post.
These connector numbers correspond to a Google Sheets document that I'll share in a follow up post.
0 2021/02/06 06:45:51
This is where everything branches off to various parts of the engine.
This is where everything branches off to various parts of the engine.
0 2021/02/06 06:59:13
The snorkel pulled away from the black PVC tubing
The snorkel pulled away from the black PVC tubing
0 2021/02/06 06:59:20
Closeup of the PVC tubing right before the split
Closeup of the PVC tubing right before the split
0 2021/02/06 06:59:27
Splitting the PVC
Splitting the PVC
0 2021/02/06 06:59:33
Closeup of the brown goop
Closeup of the brown goop
0 2021/02/06 06:59:40
Closeup of the black goop
Closeup of the black goop
0 2021/02/06 06:59:45
Blue painters tape and printed shrink tube
Blue painters tape and printed shrink tube
0 2021/02/06 07:16:18
Initially I was going to put clear shrink tube over every label but then I got lazy. Some things are a bridge too far
Initially I was going to put clear shrink tube over every label but then I got lazy. Some things are a bridge too far
0 2021/02/06 07:16:25
The snorkel is off by this point, in case it isn't clear
The snorkel is off by this point, in case it isn't clear
0 2021/02/06 07:19:09
Why 2 pictures? I don't remember
Why 2 pictures? I don't remember
0 2021/02/06 07:24:33
More documentation is better, I guess
More documentation is better, I guess
0 2021/02/06 07:24:39
DME Pins 47 and 48
DME Pins 47 and 48
0 2021/02/06 07:29:26
DME Pins 10 & 28
DME Pins 10 & 28
0 2021/02/06 07:32:12
The coding plug. I don't know that I will ever use this.
The coding plug. I don't know that I will ever use this.
0 2021/02/06 07:35:49
Here's the overall arrangement
Here's the overall arrangement
0 2021/02/06 07:38:29
I tried to get a closeup of the splice itself, just in case
I tried to get a closeup of the splice itself, just in case
0 2021/02/06 07:38:35
I don't really know what this does but it's tied, ultimately, to the injectors for some reason
I don't really know what this does but it's tied, ultimately, to the injectors for some reason
0 2021/02/06 07:40:16
Pin 40 is where things are spliced together
Pin 40 is where things are spliced together
0 2021/02/06 07:43:36
This one runs to the
This one runs to the
0 2021/02/06 07:45:57
This one runs to the
This one runs to the
0 2021/02/06 07:46:02
For a later post, these are splices M and IJ
For a later post, these are splices M and IJ
0 2021/02/06 07:55:05
It's the big fatty splice you can see in the lower left quadrant of the picture. You can sort of trace how the injector wires run to it as they curve out along their branch to the left
It's the big fatty splice you can see in the lower left quadrant of the picture. You can sort of trace how the injector wires run to it as they curve out along their branch to the left
0 2021/02/06 08:00:33
0 2021/02/13 15:04:44
It ended up being close to the top of the ridge, and left some good meat between the set screw and the face. This drilling was easy, cast iron is not a big deal to machine, it seems.
It ended up being close to the top of the ridge, and left some good meat between the set screw and the face. This drilling was easy, cast iron is not a big deal to machine, it seems.
0 2021/02/13 15:11:32
Total of approx $24. Not as cheap as a muffler hanger or two but needs must
Total of approx $24. Not as cheap as a muffler hanger or two but needs must
0 2021/02/13 15:13:57
Pretty much just transcribing the Porsche diagram into a spreadsheet
Pretty much just transcribing the Porsche diagram into a spreadsheet
0 2021/02/21 10:55:14
Adding some details as I worked out what's what
Adding some details as I worked out what's what
0 2021/02/21 10:55:16
Focus on the connectors
Focus on the connectors
0 2021/02/21 10:55:19
All similar connector types have the same kinds of symbols
All similar connector types have the same kinds of symbols
0 2021/02/21 10:58:27
0 2021/02/21 11:06:13
0 2021/02/21 11:06:14
0 2021/02/21 11:06:16
0 2021/02/21 11:06:19