Rennlist - Porsche Discussion Forums
Final shot of things peeking through behind the water hose and flappy solenoid
Final shot of things peeking through behind the water hose and flappy solenoid
0 2026/03/01 14:17:31
Run across to the clips that are on the front of the engine
Run across to the clips that are on the front of the engine
0 2026/03/01 14:17:28
Wires for 6 and 7 reclipped after some untangling, and everything tucked behind the solenoid
Wires for 6 and 7 reclipped after some untangling, and everything tucked behind the solenoid
0 2026/03/01 14:17:25
Wires 6 and 7 unplugged, unclipped from the 2 Beru clips along the front of the engine and pulled through to start routing them behind the flappy solenoid
Wires 6 and 7 unplugged, unclipped from the 2 Beru clips along the front of the engine and pulled through to start routing them behind the flappy solenoid
0 2026/03/01 14:17:22
General view of how those 2 wires will lay in the 2 wire clip, later on
General view of how those 2 wires will lay in the 2 wire clip, later on
0 2026/03/01 14:17:19
2 wire clip, back toward the firewall
2 wire clip, back toward the firewall
0 2026/03/01 14:17:16
Acorn nut off to start removing the Beru clips
Acorn nut off to start removing the Beru clips
0 2026/03/01 14:17:12
How it started
How it started
0 2026/03/01 14:17:09
No errors, looks like good signals on voltage and oil pressure.
No errors, looks like good signals on voltage and oil pressure.
0 2026/02/28 14:08:11
Slightly different angle of the previous picture. You can see how the general engine harness is in dire need of love, as well.
Slightly different angle of the previous picture. You can see how the general engine harness is in dire need of love, as well.
0 2026/02/28 14:08:08
The routing of the temperature and MAT wires
The routing of the temperature and MAT wires
0 2026/02/28 14:08:05
The ABS connection, not totally happy with the routing but that will get fixed in (an eventual) v2
The ABS connection, not totally happy with the routing but that will get fixed in (an eventual) v2
0 2026/02/28 14:08:01
New p clamps for the new harness
New p clamps for the new harness
0 2026/02/28 14:07:58
There was no way for me to get my hand and a tool in to attach a proper P clamp so this will have to do
There was no way for me to get my hand and a tool in to attach a proper P clamp so this will have to do
0 2026/02/28 14:07:54
3D printed cable junction thing, works great with the dual sided bolt and cover
3D printed cable junction thing, works great with the dual sided bolt and cover
0 2026/02/28 14:07:51
Just some tidying up, the front spoiler was just sort of hanging so not it has a little better support
Just some tidying up, the front spoiler was just sort of hanging so not it has a little better support
0 2026/02/28 14:07:48
The other wires that head up toward the hole in the engine covers.
The other wires that head up toward the hole in the engine covers.
0 2026/02/28 14:07:44
The different solenoid connector on the IMI starter necessitated a slightly janky connection, will be fixed later once I fully commit to this starter.
The different solenoid connector on the IMI starter necessitated a slightly janky connection, will be fixed later once I fully commit to this starter.
0 2026/02/28 14:07:41
Plenty of space to the oil pan
Plenty of space to the oil pan
0 2026/02/28 14:07:38
0 2026/02/28 14:06:41
0 2026/02/28 14:06:38
0 2026/02/28 14:06:35
0 2026/02/28 14:06:32
0 2026/02/28 14:06:29
0 2026/02/28 14:06:26
0 2026/02/28 14:06:23
0 2026/02/28 14:06:19
0 2026/02/28 14:06:16
0 2026/02/28 14:06:13
0 2026/02/21 15:38:22
0 2026/02/21 15:38:19
0 2026/02/21 15:38:15
0 2026/02/21 15:38:12
0 2026/02/21 15:38:09
0 2026/02/21 15:38:06
Not brilliant
Not brilliant
0 2025/12/14 14:08:57
0 2025/12/02 11:04:41
0 2025/12/02 11:04:40
0 2025/12/02 11:04:39
0 2025/12/02 11:04:04