Featherlite 3110 with 997.1 C2S
#1
Advanced
Thread Starter
Join Date: Oct 2014
Location: Bucks County, PA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Featherlite 3110 with 997.1 C2S
Hey All - Might be a newb question but I have yet to tow my 997 on my new to me Featherlite 3110, so I am wondering if anyone with the same setup might give me heads up where best the car might sit on the trailer (further front/further back)? Towing vehicle is a 2016 Toureg TDI. I have not played around with it yet, was just curious if anyone has any pointers for me.
Thanks for any input and Happy New Year.
Rob
Thanks for any input and Happy New Year.
Rob
#2
Its rear engine. Ergo, forward. Unless you back it on. In that case its aft.
#3
The exact placement is less an art, and more a science. Your tongue weight should carry 10-15% of the load.
The bulk of that is determined by car position but other variables are in play: for ex your tire rack/toolbox/gasoline jugs or lack thereof.
My solution was to buy a tongue weight scale and use that to fiddle around with a few different distances. It's fun! When I switched to a different car I got to do it all again! :-)
The bulk of that is determined by car position but other variables are in play: for ex your tire rack/toolbox/gasoline jugs or lack thereof.
My solution was to buy a tongue weight scale and use that to fiddle around with a few different distances. It's fun! When I switched to a different car I got to do it all again! :-)
#5
Below is a link to the TWS I bought. It came with an EXCELLENT booklet on guidance for how to use it, and also was an excellent resource on trailering/pitfalls/troubleshooting and prevention.
If you have a buddy who trailers they may be able to loan you one.
Also, FWIW, I've seen a couple of friends trailering their 997's and neither of them has loaded their car in reverse.
Both of them had front-weighted the trailer with toolbox/tire rack/other equip. Both of them used race ramps to avoid scraping the nose on the ramps.
You may already be experienced at trailering, but if you're not, the best pieces of advice I received:
1. GOAL -- Get Out And Look....if anything anytime anywhere feels/sounds funny etc.
2. Use the strongest ratchet tiedowns you can find
3. NEVER allow the trailer to sway. Do whatever is needed to avoid that: slow down, load distributing hitch, anything.
4. Once you establish your load distribution using TW scale, then always load the trailer the same way every time.
5. Check every single item after you load up your trailer. If you find something off, fix it, and then begin checking again from the start.
https://www.propridehitch.com/sherli...BoCuy4QAvD_BwE
If you have a buddy who trailers they may be able to loan you one.
Also, FWIW, I've seen a couple of friends trailering their 997's and neither of them has loaded their car in reverse.
Both of them had front-weighted the trailer with toolbox/tire rack/other equip. Both of them used race ramps to avoid scraping the nose on the ramps.
You may already be experienced at trailering, but if you're not, the best pieces of advice I received:
1. GOAL -- Get Out And Look....if anything anytime anywhere feels/sounds funny etc.
2. Use the strongest ratchet tiedowns you can find
3. NEVER allow the trailer to sway. Do whatever is needed to avoid that: slow down, load distributing hitch, anything.
4. Once you establish your load distribution using TW scale, then always load the trailer the same way every time.
5. Check every single item after you load up your trailer. If you find something off, fix it, and then begin checking again from the start.
https://www.propridehitch.com/sherli...BoCuy4QAvD_BwE
#6
You may already be experienced at trailering, but if you're not, the best pieces of advice I received:
1. GOAL -- Get Out And Look....if anything anytime anywhere feels/sounds funny etc.
2. Use the strongest ratchet tiedowns you can find
3. NEVER allow the trailer to sway. Do whatever is needed to avoid that: slow down, load distributing hitch, anything.
4. Once you establish your load distribution using TW scale, then always load the trailer the same way every time.
5. Check every single item after you load up your trailer. If you find something off, fix it, and then begin checking again from the start.
1. GOAL -- Get Out And Look....if anything anytime anywhere feels/sounds funny etc.
2. Use the strongest ratchet tiedowns you can find
3. NEVER allow the trailer to sway. Do whatever is needed to avoid that: slow down, load distributing hitch, anything.
4. Once you establish your load distribution using TW scale, then always load the trailer the same way every time.
5. Check every single item after you load up your trailer. If you find something off, fix it, and then begin checking again from the start.
Trending Topics
#9
Addict
Rennlist Member
Rennlist Member
I will second the 'never let anyone help you load"
#11
Just to add to the pileup...I have spent anywhere from $35 to $6500 in towing-related damage to race car and or tow vehicle in 3 years of towing. Only in one of those instances did I load my trailer alone. All other damage-related events were when someone insisted on "helping" because they obviously knew my trailer and race car better than me. n I can laugh about it now, but at the time it wasn't so funny.
https://rennlist.com/forums/trucks-a...lp-please.html
Here is a past post about improper weight distribution risks.
https://rennlist.com/forums/trucks-a...n-display.html
https://rennlist.com/forums/trucks-a...lp-please.html
Here is a past post about improper weight distribution risks.
https://rennlist.com/forums/trucks-a...n-display.html
#12
Rennlist Member
Specific to the question:
The center of the rear wheel lined up with the edge of the of the rim of the rear trailer wheel. This worked best for my 3110 with my 997RS towing with a cayenne diesel. My trailer had a small box and a tire rack, so a couple 100 lbs up front. So you may need to have yours a tick further back if you don't.
Here's a kindergarten drawing.
The center of the rear wheel lined up with the edge of the of the rim of the rear trailer wheel. This worked best for my 3110 with my 997RS towing with a cayenne diesel. My trailer had a small box and a tire rack, so a couple 100 lbs up front. So you may need to have yours a tick further back if you don't.
Here's a kindergarten drawing.
#13
Advanced
Thread Starter
Join Date: Oct 2014
Location: Bucks County, PA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Specific to the question:
The center of the rear wheel lined up with the edge of the of the rim of the rear trailer wheel. This worked best for my 3110 with my 997RS towing with a cayenne diesel. My trailer had a small box and a tire rack, so a couple 100 lbs up front. So you may need to have yours a tick further back if you don't.
Here's a kindergarten drawing.
The center of the rear wheel lined up with the edge of the of the rim of the rear trailer wheel. This worked best for my 3110 with my 997RS towing with a cayenne diesel. My trailer had a small box and a tire rack, so a couple 100 lbs up front. So you may need to have yours a tick further back if you don't.
Here's a kindergarten drawing.
#15
Advanced
Thread Starter
Join Date: Oct 2014
Location: Bucks County, PA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts