What did you do to your 997TT today?
12-19-2019 | 10:01 AM
#1
Thread Starter
Rennlist Member
Joined: Oct 2014
Posts: 2,100
Likes: 453
From: Mass
What did you do to your 997TT today?
Searched and did not find one like the 996TT thread so here we go!
Finally had the 7TT detailed and ceramic coated. Too bad it has to wait another 4 months to get back out onto the road.
Finally had the 7TT detailed and ceramic coated. Too bad it has to wait another 4 months to get back out onto the road.
The following 7 users liked this post by TheDeckMan:
cavlino (01-24-2023),
Climarepair.com (09-21-2022),
FCP Euro (10-13-2020),
harlycharly (02-02-2021),
Robocop305 (09-11-2021),
and 2 others liked this post.
Popular Reply
01-03-2021, 08:56 AM
Pro
Joined: Apr 2015
Posts: 653
Likes: 1,332
From: DC/MD/VA
Purchased, picked up and installed something that I have always wanted for my car. To say that I’m excited about them would be a huge understatement.
On top of finding a set that was somewhat local to me, I also had the pleasure of devirginizing them, as they were BNIB never been used.
Lightweight carbon bucket seats.
This is single-handedly my favorite “mod” on this car... if it could even be considered one; as they carry OE PORSCHE part #’s.
They are so light! The interior of the car now feels and smells new. Riding down the road with them puts the driver in an optimal upright position and the seats really hold you in place. I will probably do the mod on the driver seat that angles the front upward to tilt the entire seat in a slightly more reclined position.
In terms of comfort, the factory 18 way adaptive seats take the cake. But these are by no means uncomfortable by any stretch.
Entry is not terrible. Standard palm on rocker panel to support your body as you slide in place makes for a no-bolster contact procedure.
I highly recommend these seats to anyone looking at getting them.
On top of finding a set that was somewhat local to me, I also had the pleasure of devirginizing them, as they were BNIB never been used.
Lightweight carbon bucket seats.
This is single-handedly my favorite “mod” on this car... if it could even be considered one; as they carry OE PORSCHE part #’s.
They are so light! The interior of the car now feels and smells new. Riding down the road with them puts the driver in an optimal upright position and the seats really hold you in place. I will probably do the mod on the driver seat that angles the front upward to tilt the entire seat in a slightly more reclined position.
In terms of comfort, the factory 18 way adaptive seats take the cake. But these are by no means uncomfortable by any stretch.
Entry is not terrible. Standard palm on rocker panel to support your body as you slide in place makes for a no-bolster contact procedure.
I highly recommend these seats to anyone looking at getting them.
The following 4 users liked this post by domkrz:
The following 6 users liked this post by controlledchaos:
964TURBOCHAS (04-06-2020),
kasperberry (03-13-2024),
roddylennox (04-01-2020),
SOR Sacks (10-13-2024),
TheDeckMan (12-20-2019),
and 1 others liked this post.
The following 3 users liked this post by TT.BRN:
The following 3 users liked this post by Jaskfri:
The following users liked this post:
SOR Sacks (10-13-2024)
Trending Topics
The following 3 users liked this post by TheDeckMan:
The following 5 users liked this post by NSXavier:
harlycharly (11-23-2020),
Rico_FL (12-07-2020),
Robocop305 (09-11-2021),
RockyTop (03-13-2022),
TheDeckMan (04-02-2020)
04-02-2020 | 12:16 PM
#10
Rennlist Member
Joined: May 2001
Posts: 15,681
Likes: 952
From: Eagle ID
Treated my leather to step 1 of the 2 step Leatherique process. Step 1 is apply the Rejuvenating Oil, then let it bake for a day.
Step 2 this evening will be clean off the oil and dirt with Prestine Clean. Wish step 3 was a short road trip, but no can go.
I know, it's the wrong treatment so I've been told. But I like how it looks, smells and feels.
The alternative is I have to listen to my wife give me a summary of the latest DNN - Doomsday News Network.
My small gym and personal trainer are closed, so I also get a stretch and movement workout.
Step 2 this evening will be clean off the oil and dirt with Prestine Clean. Wish step 3 was a short road trip, but no can go.
I know, it's the wrong treatment so I've been told. But I like how it looks, smells and feels.
The alternative is I have to listen to my wife give me a summary of the latest DNN - Doomsday News Network.
My small gym and personal trainer are closed, so I also get a stretch and movement workout.
The following users liked this post:
TheDeckMan (04-02-2020)
The following 2 users liked this post by Ruskiy:
997turbo11 (01-02-2024),
nzskater (04-03-2020)
The following 10 users liked this post by 996pp:
barkerfam (01-05-2021),
dak996 (09-01-2023),
harlycharly (11-23-2020),
JAB_997 (10-22-2022),
Robocop305 (09-11-2021),
and 5 others liked this post.
04-05-2020 | 06:07 PM
#15
Burning Brakes
Joined: Jun 2012
Posts: 971
Likes: 17
From: Glendale CA
Removing is easy. Putting it back is when you need an extra set of hands to get it aligned correctly. Here is a good diy on 6speed
https://www.6speedonline.com/forums/...cfx8mgfwZTGDPM
https://www.6speedonline.com/forums/...cfx8mgfwZTGDPM