Innovative Centerlock tool...
#2
Burning Brakes
I need one. We all do!
#5
Rennlist Member
That is one pretty drill motor.
My torque wrench and reducer are around $800 with a little effort.
Hytorc lion .7 as seen above is on eBay at $4500 for those that have to have all the cool toys.
New, I would guess 6-8 thousand with maintenance contract.
great find
or... Porsche could go back to five lugs
My torque wrench and reducer are around $800 with a little effort.
Hytorc lion .7 as seen above is on eBay at $4500 for those that have to have all the cool toys.
New, I would guess 6-8 thousand with maintenance contract.
great find
or... Porsche could go back to five lugs
#6
Rennlist Member
Thread Starter
I've heard $3k for the gun, but who knows... at $3k it's tough to justify for something I do 4-5 times / yr... at $8k my wife leaves me, so I need to consider the cost / benefit
.
.
#7
Burning Brakes
$6-8k; good lord above
Trending Topics
#9
Rennlist Member
Spoke with Hytorc rep.
This is a one off tool they are making for the industry and is not currently for sale.
soon.
They project costs for the impact at around $4000 plus sockets and accessories.
Ill probably have to pass on this one. Maybe one of you guys could show it off the the track.
Similar to the cost of a set and a half of cup type r tires.
This is a one off tool they are making for the industry and is not currently for sale.
soon.
They project costs for the impact at around $4000 plus sockets and accessories.
Ill probably have to pass on this one. Maybe one of you guys could show it off the the track.
Similar to the cost of a set and a half of cup type r tires.
#11
Rennlist Member
Looks like the nut is modified to allow the wrench to torque it down- hard to tell from the video if the main CL body is retained or if that's modified as well. Any modifications cannot impact the safety of the CL nut system, which goes without saying.
#12
#13
#15
Addict
Rennlist Member
Rennlist Member
$4k is a bunch, but it looks like it might actually save time over 5-lugs for a change (or it would without the time and mess from the aluminum paste)...