So I bought an Ebay turbo kit for Wilson
#61
Race Car
Thread Starter
First step for me today was building a turbo mount using the supplied manifold flange. This is what drives the turbo with exhaust gas. Unfortunately the flange is not threaded, which means bulkier mounting because external nuts.
I used 2 1/2" exhaust pipe with enlarged ends. I had to "shrink" the ends to fit the flange as closely as possible with vise grips after turning the round tube square with a hammer & a bench vise.
I used 2 1/2" exhaust pipe with enlarged ends. I had to "shrink" the ends to fit the flange as closely as possible with vise grips after turning the round tube square with a hammer & a bench vise.
#63
Race Car
Thread Starter
Fit the hot air intake filter & used a hacksaw & file to cut the angle of the 2.5" elbow... very little margin for error!!
Think about it: hood clearance, brake booster clearance, master cylinder clearance, charge air cooler in relation to angle-of compressor housing , air filter clearance, oil in & oil drain, plus accessibility to additional bracket mounting for the heavy turbo! That's a lot!! Imagine if we had to run coolant in and out hoses also!!
Think about it: hood clearance, brake booster clearance, master cylinder clearance, charge air cooler in relation to angle-of compressor housing , air filter clearance, oil in & oil drain, plus accessibility to additional bracket mounting for the heavy turbo! That's a lot!! Imagine if we had to run coolant in and out hoses also!!
Last edited by Noahs944; 02-06-2017 at 11:30 AM.
#66
Race Car
Thread Starter
Thanks guys! Every dog has his day...
fwb42-slowly skills are developing and tools being collected-which helps a lot!
I work as a heavy duty truck (diesel) mechanic. My dream has always been to do work like Ron Fournier:
https://www.youtube.com/watch?v=uihrzwKbUPs
fwb42-slowly skills are developing and tools being collected-which helps a lot!
I work as a heavy duty truck (diesel) mechanic. My dream has always been to do work like Ron Fournier:
https://www.youtube.com/watch?v=uihrzwKbUPs
#73
Race Car
Thread Starter
Sorry for the crap pics but here's the beginning of the turbo mounting bracket. It was made to mount on 3 oem bolts (one bolt each on the balance shaft cover, the alt bracket & the engine to frame mount).
Dunno where to go from here, but thinking maybe the exhaust flange (post turbo).
Dunno where to go from here, but thinking maybe the exhaust flange (post turbo).