When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The answer to most questions about my build...Because RACE CAR (category specific
Appears to have no rollcage or even rollbar. Just a harness bar? If that's the case I'm pretty sure no race class would let this compete.
If those are Hoosiers, I might reconsider putting that much 'stretch' on the sidewall. Stretch is bad enough for street tires; for a stiff-sidewall competition tire more so.
Appears to have no rollcage or even rollbar. Just a harness bar? If that's the case I'm pretty sure no race class would let this compete.
If those are Hoosiers, I might reconsider putting that much 'stretch' on the sidewall. Stretch is bad enough for street tires; for a stiff-sidewall competition tire more so.
Car looks good though, nice job!
The car is built to compete in Autocross ONLY. No bar needed. The tires are old and undersized, only on the car for photos and such until spring when I buy stickers for competition. The car will run 335's and 345's.
Excellent......That looks a high quality build & paintwork, with an fair increased Aero (And drag) body, with no rollcage is it less than 2200 LB's ?
R
Thank you sir.
I have yet to get it on the scales, all winter for that. I will publish the weight when I do weigh it. For my class and displacement the car must be #2250.
As far as the additional drag goes, the car has more than enough power to overcome it at the speeds which it will compete.