When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After removing the air bag, I had found this unconnected wire idling inside the steering wheel (on the right side of the picture). May I ask what is this wire for? The horn and the tip buttons are seems working fine.
Cheers.
95 C2 Cabio
I have also never seen that configuration. It must be a tip thing relating to controls on the wheel.
Take a look at the third to last photo in this thread I posted and you can see what the wiring looks like on our manuals. You have a square cut out at the bottom of the bracket where there's a three prong connector (two now) that I have never seen before. https://rennlist.com/forums/993-foru...tallation.html
Thanks guys. Yes, mine is a Tip. It sure looks like from the connector but on the other side of the connector, there are only 2 wires too. Since everything is functioning fine, maybe I just tape it and forget it.
Thanks guys. Yes, mine is a Tip. It sure looks like from the connector but on the other side of the connector, there are only 2 wires too. Since everything is functioning fine, maybe I just tape it and forget it.
Cheers
I think that would be a better idea than connecting it blindly, without validation that it belongs to the connector...
If I was a guessing man, which Im not; Id guess it belongs in the connector as well.
If you're not pressed to slap things back together, maybe if you hang tight, someone with a tip can chime in.
Thanks everyone. I just tape it and enjoy the ride.
Cheers
Probably "outta sight, outta mind" now, but if you had concerns you could just check for voltage in a "key on" mode. Then you'd be sure to keep it from shorting on something.