Matt Romanowski

AiM just released a new firmware update and SmartCam Manager 2. Very cool in that you have more features in setting the camera up in the car and also have a Porsche gauge selection!

Also, the SmartyCam HD GP has been released. This will let you connect external sound like the original SmartyCam and even capture your radio/communicator audio.

Get the update here http://www.aim-sportline.com/mailing...e_2014_001.htm and let me know if you are in the market for a camera. I have the SmartyCam HD ready to ship and Smartycam HD GP on the way! I can help you with any other AiM products as well.

Beantown Kman

Can you use the HD GP in parallel with the SmartyCam HD? Can you elaborate a little more on sound integration?

ProCoach

Yes, you can plug two cameras in the same CAN Hub and turn them off and on automatically from the logger. The sound integration is in the form of an input jack or integrated mic on the CAN line between the camera and the hub. Then, under settings, set for internal or external mic to balance the audio levels.

Matt Romanowski

The regular SmaryCamHD does not allow for an external mic of any type. The SmartyCamHD GP will allow you to have an external mic like the old SmartyCam. This also allow you to input the sound from your Chatterbox (there is another thread about that) or your race radios into the SCHD GP and record it with the video.

Coochas

Are the GP HD cameras definitely shipping? I have one on order!
Do you know if an external mic is a must or will it work like the original SC I have?

Toby Pennycuff

Well, BOLLOCKS!!! I did not realize that the SCHD GP allowed external min input! I have a SCHD sitting because I liked the fact that I could capture my radio audio on the original SmartyCam video. Guess I'll have to sell the SCHD and look into a SCHD-GP. Drats!

Toby

ProCoach

None of us knew. Was only revealed in the release notes...

They listened to you, Toby!

Toby Pennycuff

HAH! That will be the FIRST time I've "captured" an audience with my ramblings.... Do we know pricing and availability of the SCHD-GP unit as yet?

karmx7

Can the new SmartyCam Manager 2 software will work with the SmartyCam GP? I couldn't tell from the website if it works with the older models.

CRex

Good stuff! Thanks for the heads up Matt. Been very happy with the SC products incl. my present HD.

Matt Romanowski

The new firmware and software are only for the HD models. If you have an original GP you need need to use Smarty Manager 1.

ProCoach

No, SmartyManager works with the standard definition versions, SmartyManager 2 works with all HD versions.

333pg333

Could you setup two of these cameras to run in conjunction AND write data live to the video from a Motec ECU? If so, does it show as screen in screen or split? Does it have Auto on/off function?

ProCoach

Yes, you could connect an AiM ECU Bridge to a standard MoTeC CAN output template from an ADL2 or ADL 3 (or a C1XX), connect an AiM Data Hub to the ECU Bridge and plug in two cameras to get the same info overlaid onto the video (although a direct ECU connection would be better with less hassle, IMO). It would control the cameras auto on/off, but you would need a third party video editing software to do picture in picture or split screen in post processing. If you're stuck on multi camera, I would use a Race-Keeper or a Video VBOX with the MoTeC...

333pg333

Not totally wed to the multi camera thing, just like the idea for a couple of reasons. Not really super thrilled with the quality (HD or not) of the VBox or Motec units.