911racer

Looking for a hood fender section (new or used) for race 993 front end. Like the one I have in the first and second picture here.

http://forums.pelicanparts.com/porsc...t-reduced.html

Thanks

Ed

911racer

Actually, any front end race 993 fiberglass or CF.

Thanks

Ed

Cory M

I've got some nice used 993 gt2 style fenders with bolt on flares and matching bumper and splitter all made by Getty, I have both the factory slide in headlights and fiberglass covers, also have turn signals and block off plates. This front-end bolts right up to a 911 and the fit is excellent (green parts in the attached pics).

I also have carbon fiber GT2 width fenders if you prefer the smooth look to the bolt-on flare (need to take some pics). This is set-up for 993 body but easy to fit to 911 with simple spacers on the fender flange.

I have a new fiberglass hood (see pic) as well as rear quarter panels and rockers. The quarters and rockers are like the ones on the green and white car Fordhall pictured below but they are new, I was told they came from Alex Job Racing. I've got a carbon fiber rear bumper too.

Send me a PM if interested.

911racer

I like the front fenders on the 18 car since my car has the non-gt2 look rear fenders already. But, doesnt that front bumper flare in concert with the fenders. looks different than the other fenders.

I like the evo2 front nose on the 18 car better than the one on the other car. I think it would be too hard to make my oil coolers work with the one that is too stock.

Thanks

Ed

mklaskin

Is that Steve Alarcon's old body work?

Cory M

The front fenders I have don't have the extreme flare that the Fordall car does. They are the GT2 +2" style, but it is smooth so it doesn't have the bolt-on flare. I don't know the manufacturer but they are made of carbon fiber and are good quality. I bought them with a bunch of other parts but didn't end up using them.

They look like the 3rd ones down on this page:

http://www.gettydesign.com/993_fenders.html

Cory M

Yes, but I bought it from someone else. I ended up using the rear bodywork but going with a custom front end.

911racer

Still looking for a front bumper.

Thanks

Ed

Sam N

I have a GT2 (Evo?) CF front bumper sitting in my parent's basement. I can snap a photo this weekend to see if its something that might work.

911racer

Yes, sounds interesting. Let me know.

Thanks

Ed

Sam N

Ed,
Snapped a few photos with the phone. Fiberglass.

Photos