996 Race Car Dash Layout
#1
Drifting
Thread Starter
996 Race Car Dash Layout
I have a New to me 996 Koni Car coming this week. Pictured below is the dash layout which I'd like to clean up a bit and reorganize to my liking and from an esthetics stand point. In searching on the internet I have not been able to find "Blank" center console pieces where I could drill hole for switches etc. Does anyone know the whereabouts of such an animal?
The other solution would be to start with a piece of Carbon Fiber or Plastic? If so where is a good place to source that?
Any other suggestions or ideas would be appreciated.
The other solution would be to start with a piece of Carbon Fiber or Plastic? If so where is a good place to source that?
Any other suggestions or ideas would be appreciated.
#2
Get rid of the climate control unit and install a blower switch (ala Cupcar). Then you have more dash realestate. Also you may want to get some shifter box risers...
#4
Rennlist Member
Dave, check with a company called MA Shaw. They make all sorts of CF panels for BMW's, and someone recently told me they also do some Porsche stuff.
Professional Racing and Driving Coach
Professional Racing and Driving Coach
#5
Rennlist Member
I have a New to me 996 Koni Car coming this week. Pictured below is the dash layout which I'd like to clean up a bit and reorganize to my liking and from an esthetics stand point. In searching on the internet I have not been able to find "Blank" center console pieces where I could drill hole for switches etc. Does anyone know the whereabouts of such an animal?
The other solution would be to start with a piece of Carbon Fiber or Plastic? If so where is a good place to source that?
Any other suggestions or ideas would be appreciated.
The other solution would be to start with a piece of Carbon Fiber or Plastic? If so where is a good place to source that?
Any other suggestions or ideas would be appreciated.
http://www.dragonplate.com/
#6
From a fellow ex Koni car owner...Alittlie off topic but can you give more info on the car? Where did you get it, where do you plan on running it? MORE PICS!!!! Good luck with the "new" GTB
#7
I'm in....
Rennlist Member
Rennlist Member
Trending Topics
#8
Drifting
Thread Starter
Long Story Shortened.... I PM'd a fellow R-Lister asking about his 996 as I was interested in the Spec Series and/or getting my hands on a newer platform car that was already set-up for racing. My 993 was a great DE car but had more to be done to go full race. He gave me the name of a race shop that where he had heard about the one I ultimately bought. It was buried on a Grand-Am Forum. It was campaigned by a few teams such as Bernheim, Fiorono, & recently by Dragon Speed who is now campaigning a Cup car in the GT3 Challenge (IMSA). Had it PPI’d in LA and everything was cool… I’ll post more pics when I get the car this week. It Podium’d its last couple races too.
Koni Challenge Car
3.6l engine w/ EVO airbox, Corsa Exhaust, 2002 front end facelift,Carbon fiber front bumper cover, fire system, race radio, AIM MXL5 data system, AIM DaVid Video recording data system, JRZ 3 way adjustable Shocks, Adjustable bars Front/rear, GT3 Camber Plates and Control Arms, Trans Cooler, Aasco flywheel/Sachs clutch, Limited Slip Diff, 2 sets of Fikse race wheels, and a Spare Gearbox, + 10 Tires (Hoosiers) Not mounted..
Koni Challenge Car
3.6l engine w/ EVO airbox, Corsa Exhaust, 2002 front end facelift,Carbon fiber front bumper cover, fire system, race radio, AIM MXL5 data system, AIM DaVid Video recording data system, JRZ 3 way adjustable Shocks, Adjustable bars Front/rear, GT3 Camber Plates and Control Arms, Trans Cooler, Aasco flywheel/Sachs clutch, Limited Slip Diff, 2 sets of Fikse race wheels, and a Spare Gearbox, + 10 Tires (Hoosiers) Not mounted..
#10
The Penguin King
Rennlist Member
Rennlist Member
#14
Drifting
Thread Starter
#15