Teaser w/pics!
#1
Drifting
Thread Starter
Teaser w/pics!
Sorry for any confusion.
KMR-RSR 001 is almost finished with paint & graphics. Kelly-Moss has been outstanding to deal with.
The Motec sticker will be bolder and the typeface of the names above the door will be different.
Feedback?
KMR-RSR 001 is almost finished with paint & graphics. Kelly-Moss has been outstanding to deal with.
The Motec sticker will be bolder and the typeface of the names above the door will be different.
Feedback?
Last edited by mklaskin; 03-31-2011 at 04:49 PM.
Trending Topics
#8
Drifting
Thread Starter
Thanks for the support. Here's some of the procees including a photo after paint, prior to vinyl.
If I've learned anything from RL, it's that pics count!
If I've learned anything from RL, it's that pics count!
Last edited by mklaskin; 03-31-2011 at 04:49 PM.
#10
Looks AWSOME!!! Thinking about a total repaint this winter. I did the bottom for a change but it needs your type of magic touch. Love the new graphics, subtle and yet very racy.
Good luck.
Good luck.
#12
Drifting
Thread Starter
Um, no. I was hoping to have her done in time for RADE, but that's not going to happen. Some slight delays rebuilding the engine have pushed
me out of the event.
I'll get over it. The new engine should be substantially stronger, and will have a Motec ECU with TC and Data.
I'll post pics of the finished car soon, I hope.
me out of the event.
I'll get over it. The new engine should be substantially stronger, and will have a Motec ECU with TC and Data.
I'll post pics of the finished car soon, I hope.
Last edited by mklaskin; 03-31-2011 at 04:49 PM.
#13
Um, no. I was hoping to have her done in time for RADE, but that's not going to happen. Some slight delays rebuilding the engine have pushed
me out of the event.
I'll get over it. The new engine should be substantially stronger, and will have a Motec ECU with TC and Data.
I'll post pics of the finished car soon, I hope.
me out of the event.
I'll get over it. The new engine should be substantially stronger, and will have a Motec ECU with TC and Data.
I'll post pics of the finished car soon, I hope.
#15
Drifting
Thread Starter
John's still got me covered, but hope fully I'll be a little bit closer.
The good thing about Ruther is that he runs pretty close, but you never have to worry about him pulling any stunts. He's always very aware of his surroundings.
The good thing about Ruther is that he runs pretty close, but you never have to worry about him pulling any stunts. He's always very aware of his surroundings.