How do you run cool shirt hose into driver suit?
#18
Three Wheelin'
Join Date: Sep 2005
Location: Fort Worth, TX
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
#19
Race Car
OK, I got a question,
How bad would it be to get out of your car and into a student's car, without taking it off?
how long to drain out, and how much hotter to wear in a 30 min session?
Totally impractical? or better cause you start off 2nd session cooler?
-guessing it would take 3-5 min to undress/redress, which is too long.... w/ back to back sessions.
How bad would it be to get out of your car and into a student's car, without taking it off?
how long to drain out, and how much hotter to wear in a 30 min session?
Totally impractical? or better cause you start off 2nd session cooler?
-guessing it would take 3-5 min to undress/redress, which is too long.... w/ back to back sessions.
#21
Rennlist Member
#22
Three Wheelin'
Mine comes out the zipper of my driving suit, and I look like a moron walking around like that. I like the pocket idea, and that's what I will do.
Bill Seifert
1987 944S Race Car
1999 Honda Civic SI Race Car
Bill Seifert
1987 944S Race Car
1999 Honda Civic SI Race Car
#24
Addict
Rennlist Member
Rennlist Member
Into thru the the zipper,twice around Mr.Happy and the twins then plug into the shirt.
The following users liked this post:
carbondan (05-22-2022)
#26
Rennlist Member
#27
Let's bring this thread back to practicality.
Has anyone mounted the cooler box in the front compartment in a 911 and run the hoses into the cabin ?
Also, any preference to the 12 qt vs 24 qt box ?
Has anyone mounted the cooler box in the front compartment in a 911 and run the hoses into the cabin ?
Also, any preference to the 12 qt vs 24 qt box ?
#28
Rennlist Member
Yes, I do JUST that and I have a 12 qt...it does just find for me in my originally street car...but as far as a cup or completely stripped out bare metal car...I would go for the 24 just so you have the cool for as long as possible.
#29
Advanced
Join Date: May 2008
Location: Toronto/Mosport
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
I tired finding room in my "up front compartment" but it was full of all this junk my mechanic told me I couldn't rip out - 2.8L of it!
#30
before i go cutting through my suit, i cant be the only person asking this question.
i have the Sparco RS7 suit. There is no slit.
I have been running my hoses all the way up and out through the left side of the neck after zipped up and connecting the hoses under my left arm. It works but i dont like it.
do i cut a hole in the waist side ? and nomex thread it. i do have a pocket so do i cut a hole in the pocket and feed it through that way?
i have the Sparco RS7 suit. There is no slit.
I have been running my hoses all the way up and out through the left side of the neck after zipped up and connecting the hoses under my left arm. It works but i dont like it.
do i cut a hole in the waist side ? and nomex thread it. i do have a pocket so do i cut a hole in the pocket and feed it through that way?