Racetech seat - experiences and opinions wanted
#1
Rennlist Member
Thread Starter
Racetech seat - experiences and opinions wanted
I am looking at the 4009HR seen here http://www.saferacer.com/ra40rase.html
I sat in one with helmet and HANS, felt super comfortable. Just wondering if anyone has any experience with this seat? Good, bad, or indifferent? TIA.
I sat in one with helmet and HANS, felt super comfortable. Just wondering if anyone has any experience with this seat? Good, bad, or indifferent? TIA.
#2
I really like mine. I've gone from an OMP to Cobra, and now this. The Racetech is by far the most comfortable to me. Also durable. I use an R3 instead of hans so I can't give you any comparisons there.
They have 4 mounting holes. Two front and two rear so there is a lot of adjustablity.
They have 4 mounting holes. Two front and two rear so there is a lot of adjustablity.
#3
Addict
Rennlist Member
Rennlist Member
tchandler great avitar ! Mrs Chandler I hope ?
#4
Rennlist Member
Thread Starter
I really like mine. I've gone from an OMP to Cobra, and now this. The Racetech is by far the most comfortable to me. Also durable. I use an R3 instead of hans so I can't give you any comparisons there.
They have 4 mounting holes. Two front and two rear so there is a lot of adjustablity.
They have 4 mounting holes. Two front and two rear so there is a lot of adjustablity.
#5
Nordschleife Master
I am looking at the 4009HR seen here http://www.saferacer.com/ra40rase.html
I sat in one with helmet and HANS, felt super comfortable. Just wondering if anyone has any experience with this seat? Good, bad, or indifferent? TIA.
I sat in one with helmet and HANS, felt super comfortable. Just wondering if anyone has any experience with this seat? Good, bad, or indifferent? TIA.
#6
i like the built in seatback brace mounting holes and also you can use a side net with that seat. I am looking at the same one. I am between that and the Cobra Evo Technology seat. Currently i have a Recaro Pro Racer
#7
Rennlist Member
Thread Starter
The 4009HR seat I have does not have the seatback brace mounts. Maybe the other versions of the seat do? I know they have several different models.
Jim
Trending Topics
#8
Formula One Spin Doctor
Rennlist Member
Rennlist Member
#9
Rennlist Member
Thread Starter
#10
best seat there is out there. had the highest crash test scores and handles more G's then all the other makes (unless they've released newer models that beat the 4009HR). i run this in my 996 grand am cup.
#11
Three Wheelin'
Pulling this up from the dead. For the long-of-torso, does the RaceTech pose any issues? I had a Cobra Suzuka, previously, that had the elongated holes, and it was great.
Rough estimate on my seat bottom to shoulder is 28". If anyone can take a quick measurement, I'd appreciate it.
-Jon
Rough estimate on my seat bottom to shoulder is 28". If anyone can take a quick measurement, I'd appreciate it.
-Jon
#12
Race Car
You can't go wrong with seats like the Racetech RT4009HR and Cobra Sebring Pro. I looked at both seats and went with the Cobra solely because I fit in it better. With these seats, fit becomes the most important factor as far as I am concerned.
Good luck!
Scott
Good luck!
Scott
#13
Three Wheelin'
Scott,
Totally agree with you, I just wanted to have an idea if I should even bother to take the trek to try out the Racetech, or just go for the Cobra by default.
-Jon
Totally agree with you, I just wanted to have an idea if I should even bother to take the trek to try out the Racetech, or just go for the Cobra by default.
-Jon
#14
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
Pulling this up from the dead. For the long-of-torso, does the RaceTech pose any issues? I had a Cobra Suzuka, previously, that had the elongated holes, and it was great.
Rough estimate on my seat bottom to shoulder is 28". If anyone can take a quick measurement, I'd appreciate it.
-Jon
Rough estimate on my seat bottom to shoulder is 28". If anyone can take a quick measurement, I'd appreciate it.
-Jon
The WTHR version (wide and tall) is about 28 from the base to the guide holes.
http://racetechseatsna.com/products....s/RT9009HR.php
Scroll to the bottom to see the numbers.