911 front fender louvres??
#17
Rennlist
Basic Site Sponsor
Basic Site Sponsor
__________________
Pete
Power. Lots is good, more is better, too much is just right...
'87 951, RIP
'00 996 C2 L92U AQ / IXAA IXRB IX54 M96/7.xx G96/7.88 M030 M375 M376 M436 M476 M601 M983 ... + 991 GT3 brakes, 997 GT3 sway bars, fully monoball'd suspension, Bilstein Cup Car coilovers, do88 Big Pack ICs. 10 & 12 x 19" BBS CH-R wheels with 265/30 & 325 /30 -19 MPSC2s.
Pete
Power. Lots is good, more is better, too much is just right...
'87 951, RIP
'00 996 C2 L92U AQ / IXAA IXRB IX54 M96/7.xx G96/7.88 M030 M375 M376 M436 M476 M601 M983 ... + 991 GT3 brakes, 997 GT3 sway bars, fully monoball'd suspension, Bilstein Cup Car coilovers, do88 Big Pack ICs. 10 & 12 x 19" BBS CH-R wheels with 265/30 & 325 /30 -19 MPSC2s.
#20
Race Car
Doug,
That is better placement but probably not enough venting. Also, I don't want to put slats directly in the fiberglass fenders. I want to have a part I install similar to what Pete posted.
I think the best solution is to get Mahlers9th to make me a set. But he won't even make himself a set. So I may just open up a section in the fender right behind the wheel arch. Similar to what is seen here:
That is better placement but probably not enough venting. Also, I don't want to put slats directly in the fiberglass fenders. I want to have a part I install similar to what Pete posted.
I think the best solution is to get Mahlers9th to make me a set. But he won't even make himself a set. So I may just open up a section in the fender right behind the wheel arch. Similar to what is seen here:
#21
Drifting
See them on Duane's car here:
https://rennlist.com/forums/racing-and-drivers-education-forum/883242-vision-motorsports-yokohama-cayman-s.html
#22
Race Car
Vision Motorsport in orange county actually has some nice carbon fiber ones now. I've seen them on 993, Boxster, and Cayman.
See them on Duane's car here:
https://rennlist.com/forums/racing-a...-cayman-s.html
See them on Duane's car here:
https://rennlist.com/forums/racing-a...-cayman-s.html
Scott
#23
Rennlist Member
Are you allowed to run a 935 style fender? Totally open at the rear. Agreed on the vents being positioned further back. Also the front louvre should be steeper than those behind it in general terms.