Cup ABS unit FS
#1
Racer
Thread Starter
Cup ABS unit FS
For sale is a good, working 996 Cup ABS unit that was used in my 997.2 (2010) Cup for less than 10 hours or so while I was learning to drive. I bought it very lightly used from a team mate who used it in his 997.2 Cup for the same purpose.
The unit needs new hard lines that can be ordered from Porsche Motorsport of your country. The wiring harness is included in the sale.
I bought it for $8k including the lines. Willing to take $5k for it. Pictures are attached.
Unit is located at BR Racing in Los Gatos, CA
PM on here is fine, or email is best, my email is just my name (Annand) at gmail...
Thanks
The unit needs new hard lines that can be ordered from Porsche Motorsport of your country. The wiring harness is included in the sale.
I bought it for $8k including the lines. Willing to take $5k for it. Pictures are attached.
Unit is located at BR Racing in Los Gatos, CA
PM on here is fine, or email is best, my email is just my name (Annand) at gmail...
Thanks
Last edited by MirageJHU; 11-12-2014 at 01:42 PM.
#2
Addict
Rennlist Member
Rennlist Member
PM sent.
#5
Racer
Thread Starter
Not 100% sure on the model, was hoping the RL hive mind could figure that out for me..
Like I said it did come out of my 997.2 Cup and prior to that it was in another 997.2 Cup.
I'm getting a pic of the wiring from the shop and will post it here as that seems to be the most requested thing in PMs.
I think I answered every PM and email I got, if not, I apologize I'll double check or just hit me again.
Thanks!
Like I said it did come out of my 997.2 Cup and prior to that it was in another 997.2 Cup.
I'm getting a pic of the wiring from the shop and will post it here as that seems to be the most requested thing in PMs.
I think I answered every PM and email I got, if not, I apologize I'll double check or just hit me again.
Thanks!
#6
Racer
Thread Starter
Pics of the harness attached.
Trending Topics
#8
Racer
Thread Starter
I actually just had a conversation with the original purchaser of this. It is apparently a 996 Cup ABS. Worked just fine in the 2010 and 2011 cars it was installed in.
It's NOT the $20k MS4 crazy adjustable thing that the pros use.
This unit WILL get you through braking zones safely though
It's NOT the $20k MS4 crazy adjustable thing that the pros use.
This unit WILL get you through braking zones safely though
#10
Racer
Thread Starter
bump
#11
Rennlist Member
How does this sit with the ECU programming in our cars? Will a flash of the Bosch MS3 be required?
#12
Racer
Thread Starter
Was totally plug and play
Sorry but it's SOLD!
Sorry but it's SOLD!