ir_fuel

Hi

Does anyone know which Motec is installed in a 2004 996 GT3 cup car? I presume it is the same as the one in the earlier cars that are "upgraded to 2004 spec"?

Thanks

911racer

Are you talking about the dash unit or the MS3.1 engine computer.

Thanks

Ed

claykos

The engine computers were always Bosch.

If I recall all the 996s came with factory analog type dash boards. Looking through my 2005 cup service manual shows this as well. I think some of the cars might have had a motec logger that did not have a display....

99% of the cups out there had some type of Motec or Aim dash put in at some point in their life though. If it was done in the 2004 time frame it would have had a motec ADL dash put in. The RS and RSR cars came factory with a Motec ADL dash.

ir_fuel

It's not a dash. Its a datalogger. All 2004 996 cups come with a Motec if I am not mistaken.

cid042

Here, in France, the 2004 come with the analog dash and the possibility of putting a Motec "Mini" display or an ADL in addition to the analog standard dash. A friend of mine has had his 2004 with an ADL2 added on the analog dash, but most of the so called "upgraded to 2004 specs" as well as the majority of the 2004 cars that we see in there do not have any Motec display.

coryf

The 996 cup never came with any data system from the factory.

sstreime

I believe Cory is correct that the cars did not come from the factory with MoTec however, there was a factory approved installation for the SuperCup and Carrerra Cup which included an enclosed data logger and MDD. If interested i have posted for downloading the installation instructions and the wiring diagram. https://dl.dropbox.com/u/38126505/3M...aCupsystem.ppt and https://dl.dropbox.com/u/38126505/Mo...ranslation.pdf the first link is to a powerpoint document and the 2nd is to a pdf.

Red9

Cup Cars went to quite a few different series and they were not all the same spec.

PedroNole

When you criticize other posters please recognize that this is a "friendly" forum with people who provide answers that attempt to help. If you know something different, then offer it as a counterpoint or additional information. Oh, and why don't you join the forum and be a member, not just a "user."

roketman

+1

jrgordonsenior

+2

al@cpt

+1

ir_fuel

So the only thing "Motec" about that system is just the mini display then?

Ok. Still got a lot to learn. This is a whole new world for me, coming from street cars.

ir_fuel

Checked the files. This is the thing I am talking about!
What type MoTeC is that exactly? I was checking the AIM site to see the compatibility list for their dashboards and I was wondering if the 996 cup MoTeC system is on the list. The Bosch MS3 ECU is.

If you are wondering "why not go for a MoTeC dash instead?". Compare the MXL prices to the MoTeC ones for the same functionality and you'll quickly understand why (and I've been a happy AIM user for many years on both motorcycles and cars).

sstreime

The unit that was in my car was marked ADL-8. It is an enclosed data logger with the MDD as the mini display.