tasman

2 sets.
1. satin black
2. red (color red closest to caliper color)

thanks for organizing Richard

tal

realdrray

2 sets for me as well

1. satin black
2. red

RDCR

Master list:

**NOTE** Per Dan all of the vinyl has to be gloss

RDCR: 1 set black, 1 set Red, 1 set yellow
Mecho: 1 set in Red
Buteo: 1 set black
Scottykenneth: 1 set black
tasman: 1 black, 1 set Red
realdrray: 1 black, 1 set Red
mhoffman: 1 set black
etp:: 1 set black, 1 set orange
monochrom3: 1 set black
Jimmy-D: 2 sets black
needmoregarage: 1 set black
supercharged man: 1 set in satin black
RAC10000: 1 set Satin black
Steve D: 1 set black
GourmetMBA: 1 set black
Halfshaft: 2 sets in black
Joemat: 1 set black
jgarvish: 2 set red
Qship: 1 set black
Stingray 84 1 set: 2 black, 2 red
Gibbons: 1 set black



Guys: please don't PM me with your order post it here on the thread.

Keep in mind a "set" is 4 decals. You can get 2 different colors - 2 each color in one "set" if desired. They sound a little tricky to put on so it's not a bad idea to have 4 decals in a color in case you screw up.

I'll probably cut this off at 20 people because I don't have enough time to deal with much more then that!

Just in from Dan:

"In order to install the decals successfully in the indent they will need to have a gloss finish. The gloss allows the film to lose its memory when applying heat. Also, you will need to lick your finger which will conform the film to the concave. A gloss works better for this highly technical procedure"

Sounds like everyone should expect a gloss finish, especially in black. I'll go ahead and write down everyones black request and talk to Dan about what will work but it sounds like black may be limited to gloss black. Let me know if that changes anyone's order.

Rich

etp

I would order one set in matte black and one in orange.

monochrom3

I'll do a set I matte black

monochrom3

Thanks for doing this. I've organized group buys in the past and know how much work it can be. Much appreciated

Jimmy-D

One set - Satin Black and Yellow

needmoregarage

One set (of 4) in satin black

Thank you for taking this on!!
I'll await instructions on payment.

superchargedman

Thanks, Richard. I just heard from Dan. I'd like to buy 4 decals in satin black. Thanks!

Perimeter

Yellow, if the color matches the calipers.
Ferrari shields are a slightly different yellow than their calipers and it bugs my eye to no end

Rac10000

I would like a set in Satin black as well.

Thanks for putting this together!

Steve D

1 set in satin black please.
Thanks!

Gourmetmba

1 set: 2 decals in matte black, 2 decals in satin black

Thanks!

Halfshaft

I would like 2 sets in Satin black.
Thanks for putting this together!

Joemat

I would like a set in satin black. Thanks