GT4 Picture Thread
11-22-2016, 09:27 PM
#1952
Rennlist Member
Don't hesitate to contact us!
11-23-2016, 05:03 AM
#1954
Rennlist Member
Nice photos.
11-23-2016, 10:57 AM
#1956
Rennlist Member
Join Date: Jan 2016
Location: On a pygmy pony over by the dental floss bush
Posts: 3,309
Received 620 Likes
on
422 Posts
Cold morning in Northern Arkansas
Looks like it could use a warm blanket 
. Was 39 degrees when this was taken in a hotel parking lot in Mountain Home, Arkansas. Then drove a short distance to the dam at Norfork Lake. Got there right as the fog from the lake was spilling over the top of the dam with a gentle North breeze. About 10 minutes later the fog was gone, before I could get a good picture. I drove across the dam through the fog and by the time I stopped it was burned off as the sun came all the way over the horizon.
Left the Norfork Dam and drove down the Push Mountain Road. Awesome.
http://www.motorcycleroads.com/75/34...tain-Road.html
I wish someone would make this thread a sticky, at the very top of the sticky GT4 threads. The forum should also showcase how beautiful and fun these cars are to balance out the few issues people have had with them after lots of hard use.
EDIT: Thanks moderator for making this a sticky!
.
. Was 39 degrees when this was taken in a hotel parking lot in Mountain Home, Arkansas. Then drove a short distance to the dam at Norfork Lake. Got there right as the fog from the lake was spilling over the top of the dam with a gentle North breeze. About 10 minutes later the fog was gone, before I could get a good picture. I drove across the dam through the fog and by the time I stopped it was burned off as the sun came all the way over the horizon.Left the Norfork Dam and drove down the Push Mountain Road. Awesome.
http://www.motorcycleroads.com/75/34...tain-Road.html
I wish someone would make this thread a sticky, at the very top of the sticky GT4 threads. The forum should also showcase how beautiful and fun these cars are to balance out the few issues people have had with them after lots of hard use.
EDIT: Thanks moderator for making this a sticky!
.
Last edited by okie981; 11-26-2016 at 08:51 AM.
11-23-2016, 06:43 PM
#1960
11-23-2016, 07:56 PM
#1961
Advanced
Join Date: Oct 2016
Location: the hood (oakland)
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
11-23-2016, 08:09 PM
#1962
Advanced
No removal of the subframe connector was required, I just needed to push the muffler pipe a little harder to release the studs on the cat and it came right out. Big thanks to Dr. Phil Gandini for his help on this!
Last edited by JustACarGuy; 11-29-2016 at 05:41 PM.
11-23-2016, 09:20 PM
#1963
11-23-2016, 10:10 PM
#1964
Advanced
Join Date: Oct 2016
Location: the hood (oakland)
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
