Cheap Axle Alternative
03-20-2012 | 07:37 AM
Thread Starter
Joined: May 2009
Posts: 2,530
Likes: 1
From: Atlanta, Ga
03-20-2012 | 08:56 AM
Joined: Apr 2004
Posts: 1,268
Likes: 3
From: Durham, CT
Wish I knew this last week!!
Great research though. Thanks!
03-20-2012 | 10:32 AM
Joined: Mar 2005
Posts: 8,809
Likes: 0
From: In the garage trying to keep boost down
Awsome great find. How are they holding up?
03-20-2012 | 10:36 AM
Joined: Dec 2009
Posts: 4,124
Likes: 124
From: Chesapeake, VA 23322
Nice, so works on the 86 turbo?
03-20-2012 | 11:57 AM
Joined: Apr 2006
Posts: 1,012
Likes: 1
From: Atlanta
Worth buying a pair to have just in case.
03-20-2012 | 12:19 PM
Joined: Mar 2006
Posts: 8,695
Likes: 134
We need a stickied thread with some of this cross-referenced stuff.
These axles, the BMW reference sensors, the VW visor clips, etc.
03-20-2012 | 12:20 PM
Joined: May 2009
Posts: 2,728
Likes: 11
If they are hollow, they'll snap on your first real wheel-hop with your V8 implant. The Empi Type 2 CV's make the axle the weak point.
03-20-2012 | 12:26 PM
Joined: Feb 2007
Posts: 1,324
Likes: 0
From: Norway
cheap enough to cut one up to check?
03-20-2012 | 12:42 PM
Joined: Mar 2005
Posts: 8,809
Likes: 0
From: In the garage trying to keep boost down
Quote:
Originally Posted by
xschop
If they are hollow, they'll snap on your first real wheel-hop with your V8 implant. The Empi Type 2 CV's make the axle the weak point.
who cares about V8's
03-20-2012 | 12:45 PM
Joined: Oct 2002
Posts: 3,638
Likes: 1
From: KC, MO
Quote:
Originally Posted by
reno808
who cares about V8's
If it can handle the low end torque a V8 provides then it would be perfectly fine with a high HP Turbo.
03-20-2012 | 01:11 PM
Joined: Mar 2005
Posts: 8,809
Likes: 0
From: In the garage trying to keep boost down
Quote:
Originally Posted by
86 951 Driver
If it can handle the low end torque a V8 provides then it would be perfectly fine with a high HP Turbo.
i was kidding lol
03-20-2012 | 03:55 PM
Joined: Feb 2007
Posts: 1,408
Likes: 0
From: Indianapolis,IN
The description on Rockauto says they have:
Precision cold rolled splines and threads
100% solid precision machined axle bars
Neoprene CV boots
Stainless steel boot clamps
Premium quality Moly grease used on all joints
03-20-2012 | 04:08 PM
Joined: Apr 2006
Posts: 1,012
Likes: 1
From: Atlanta
From what robstah was saying on saturday is that they look like a quality piece.
03-20-2012 | 04:10 PM
Joined: Apr 2009
Posts: 3,641
Likes: 1
From: Knoxville, TN
Quote:
Originally Posted by
anders44
cheap enough to cut one up to check?
Just weigh it. Or pull both CV's and you'll be able to tell right away.
03-20-2012 | 04:15 PM
Joined: Jan 2006
Posts: 1,620
Likes: 6
From: Orlando, FL
Just dump the clutch a few times; easiest and most fun way to test your new axles.