ProCoach

It's raw, unscripted and poorly lit, but it's the first of many on the Krause & Associates Facebook page, the unboxing of the new MoTeC V2 Video camera.

In this six-minute video, I talk about first impressions of the unit itself, the current and legacy dashes it works with and what's in the box. Like I said, it'll get better in future editions, but it's a fun and informative deal!

Matt Romanowski

You forgot the link

Good to see your getting in on posting up some videos. Recorded with a HD2?

ProCoach

The key is not to let great get in the way of good, Matt!

tedean

Peter, can't wait to see the video...Link? I really appreciate your help in sorting through the many products. I am confident this will work best for me, with my existing system...more after the install!

ProCoach

No easy link transfer anymore, hence the director to the company Facebook page.

Maybe this? https://www.facebook.com/plugins/pos...54412925373790

Nah, will noodle on this another time...

Matt Romanowski

This should be a link to the video on Peter's facebook page https://www.facebook.com/VintageProC...4707879998673/

ir_fuel

Sorry, this content isn't available right now
The link you followed may have expired, or the page may only be visible to an audience you're not in.
Go back to the previous page · Go to News Feed · Visit our Help Center

ProCoach

Works fine for me. Both links, but Matt's goes right to the video.

tcsracing1

would this be an upgrade for the camera we are using in the GT4CS trophy east?

ProCoach

Tom, I do think this is a less complicated, more integrated and a fully automated solution for the GT4 CS TE cars, IF you use (or begin to use) the video features of i2 analysis in MoTeC.

It's much higher resolution (1080p instead of 720p), it is automatically synced in both i2 and i2 Pro with the data, it's totally automated and controlled by your C125, and it's just two wires to the back of the Dash (or the MoTeC CAN) and two wires to power and ground (piggybacked off the dash).

You could sell the SCHD (or use it as a rear camera) and Bridge for half of what this V2 costs, if you wish. PM me.

ProCoach

Example video (with crappy sampling from being uploaded to YouTube) here: https://youtu.be/OCs_i6FYV9o

ir_fuel

So they released a motorsports camera with a rolling shutter? I hope this costs less than $500

Matt Romanowski

Just looking at the MoTeC page for the camera and they said it doesn't put best lap or even rolling lap on the video? Has that been finalized yet?

From the website:

V2 Video can have the following data overlaid, depending on the sensors installed.
Throttle Position: displayed as a green bar graph scaled between 0% and 100%
Ground Speed: displayed as numeric value from 0 to 999 kph
RPM: displayed as a gauge from 0 to 10000 rpm
G-Force: displayed as a G circle from 0 to 2 G with an indicator point
Brake Switch or Pressure: displayed as a red bar graph
Gear: displayed as numeric value

Lap Number, Last Lap Time, Running Lap Time are currently in development and will be available in a future release.

ProCoach

No, the first units are just now being delivered after announcement last summer/fall. The connector and cabling is in line with MoTeC's other offerings.

Just like AiM, Racelogic and other products, the hardware is in place, major functionality is in place and additional features will be added later through firmware updates.

It is the simplest, easiest (and most cost effective, especially if you have Standard logging only enabled) solution to add to MoTeC display/loggers from the ADL2 product on.

The information you ask for is available in the "squiggly lines" log file...

ProCoach

Let's not thread crap...