Notices
Cayenne 955-957 2003-2010 1st Generation
Sponsored by:
Sponsored by:

2011 side marker swap

Thread Tools
 
Search this Thread
 
Old 03-07-2011, 03:56 AM
  #31  
Aperture776
Instructor
 
Aperture776's Avatar
 
Join Date: Nov 2010
Posts: 103
Received 30 Likes on 18 Posts
Default

Originally Posted by slwong23
Wow, very obvious by that picture. I certainly would have noticed if my clear and amber lenses were that different in size. For my own sanity, I just double checked again, and my two are definitely the same size. Bizarre. I ordered in late Nov and they arrived early/mid Dec.
Yea, the light definitely protrudes out with mine. Its just really odd that mine and yours are exactly the same item# but different light.
Old 03-07-2011, 03:59 AM
  #32  
Mike in CA
Race Director
 
Mike in CA's Avatar
 
Join Date: Jun 2001
Location: North Bay Area, CA
Posts: 11,969
Received 128 Likes on 67 Posts
Default

Originally Posted by Aperture776
Here are the pictures. Sorry for the crappy pics they're from my iPhone. You can see the difference between the 2.

And I just double checked the box with the item# on them. They are exactly the item # that everyone else posted so far. I don't understand why Porsche would have the same item#'s if there are 2 different types unless they updated the clears to the larger ones. Just for reference, I just received my clears about 2 weeks ago.

As you can see from the bottom pic, mine looks exactly like mike's.
I think you're on to something. Maybe they did update the design on the clears. I ordered mine in late January. FWIW, take a look at the pics below from the Porsche website. The silver car is a base Cayenne while the black one is a Turbo. Both appear to have identical side markers and although it's hard to tell whether they are more like Apeture's and mine, or slwong's, they seem to be sculpted and protrude more than the yellow markers. Personally, I'm OK with the ones I have.
Attached Images   

Last edited by Mike in CA; 03-07-2011 at 01:26 PM.
Old 03-07-2011, 03:54 PM
  #33  
Aperture776
Instructor
 
Aperture776's Avatar
 
Join Date: Nov 2010
Posts: 103
Received 30 Likes on 18 Posts
Default

I just talked to Aldo from Suncoast and he told me that is the only item # that they have for the 2011 Cayenne and wasn't aware of different sizes. He thinks it might be a new design because that is the only part # for euro clear side markers for the cayenne from Porsche.
Old 03-07-2011, 04:29 PM
  #34  
nedino
Advanced
 
nedino's Avatar
 
Join Date: Jan 2007
Location: New York, NY
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default

I also got mine from Suncoast. Also bigger than the original.
Old 03-07-2011, 04:56 PM
  #35  
slwong23
Rennlist Member
 
slwong23's Avatar
 
Join Date: Sep 2010
Location: LA <> LV
Posts: 909
Received 406 Likes on 206 Posts
Default

Odd that Porsche would keep the same part number if indeed it's a new design. Anyhow, I looked at mine for like the 5th time, and while you can't get an exact comparison of the 2 markers while one is in the vehicle, the clear still does not look any bigger than the amber.

Aperture, from the pic you posted, it seems it would be nearly impossible to not notice the size difference, whether in the vehicle or not. This is driving me a little nutty, but not to the point that I want to remove the clear out of the car.

Wonder if anyone else has the smaller clears?
Old 03-07-2011, 06:29 PM
  #36  
Mike in CA
Race Director
 
Mike in CA's Avatar
 
Join Date: Jun 2001
Location: North Bay Area, CA
Posts: 11,969
Received 128 Likes on 67 Posts
Default

Originally Posted by slwong23
Odd that Porsche would keep the same part number if indeed it's a new design. Anyhow, I looked at mine for like the 5th time, and while you can't get an exact comparison of the 2 markers while one is in the vehicle, the clear still does not look any bigger than the amber.

Aperture, from the pic you posted, it seems it would be nearly impossible to not notice the size difference, whether in the vehicle or not. This is driving me a little nutty, but not to the point that I want to remove the clear out of the car.

Wonder if anyone else has the smaller clears?
I know I'm not in nearly as good a position to judge from a pic as you are in person. But looking at your photo, it seems to me that the curve at the trailing edge of the marker is pronounced and shorter; just like the clear in Apeture's photo, while his yellow marker is flatter and longer in the same area. Again, though, you're there and I'm just looking at a picture.
Attached Images   
Old 03-07-2011, 07:26 PM
  #37  
Aperture776
Instructor
 
Aperture776's Avatar
 
Join Date: Nov 2010
Posts: 103
Received 30 Likes on 18 Posts
Default

Here is a comparison of how much the clear protrudes. I reinstalled the amber (takes only 5 min) to show you guys. Sorry didn't have time to rotate pictures.
Attached Images   
Old 03-07-2011, 07:41 PM
  #38  
rijowysock
Nordschleife Master
 
rijowysock's Avatar
 
Join Date: Apr 2009
Location: The Arctic Cold
Posts: 5,718
Likes: 0
Received 10 Likes on 5 Posts
Default

thats insane and makes no sense whatsoever.

esp since the "wide fenders" and "extended fenders" dont go near it.

can they check their stock and see if any slimmer ones? send back/swap.
Old 03-07-2011, 07:58 PM
  #39  
Blaine S
Rennlist Member
Thread Starter
 
Blaine S's Avatar
 
Join Date: Jan 2005
Location: MA
Posts: 585
Received 17 Likes on 8 Posts
Default

I purchased clears from my local dealer and the part numbers I have are:

958 631 101 00
958 631 102 00

at the widest part they are just over 3cm.

Last edited by Blaine S; 06-01-2014 at 10:34 AM.
Old 03-07-2011, 08:39 PM
  #40  
Aperture776
Instructor
 
Aperture776's Avatar
 
Join Date: Nov 2010
Posts: 103
Received 30 Likes on 18 Posts
Default

Originally Posted by Blaine S
I purchased clears from my local dealer and the part numbers I have are:

958 631 101 00
958 631 102 00

at the widest part they are just over 3cm.
Ok now I see different item#'s. Your item number ends with 00 mine and Mike's end in 10. That might be the difference right there. I will try to call suncoast tomorrow and clarify again.
Old 03-07-2011, 09:00 PM
  #41  
slwong23
Rennlist Member
 
slwong23's Avatar
 
Join Date: Sep 2010
Location: LA <> LV
Posts: 909
Received 406 Likes on 206 Posts
Default

Originally Posted by Aperture776
Ok now I see different item#'s. Your item number ends with 00 mine and Mike's end in 10. That might be the difference right there. I will try to call suncoast tomorrow and clarify again.


Riddle solved for me guys, sorry... Dyslexia must have set in, as I missed the 00 at the end- my part #s match Blaine's.

That did not stop me from checking my lenses again, however. Suffice to say, I do feel a little better knowing that mine are likely the same size, as my amber lens measures a little more than 3cm wide.
Old 03-07-2011, 09:26 PM
  #42  
Aperture776
Instructor
 
Aperture776's Avatar
 
Join Date: Nov 2010
Posts: 103
Received 30 Likes on 18 Posts
Default

Originally Posted by slwong23


Riddle solved for me guys, sorry... Dyslexia must have set in, as I missed the 00 at the end- my part #s match Blaine's.

That did not stop me from checking my lenses again, however. Suffice to say, I do feel a little better knowing that mine are likely the same size, as my amber lens measures a little more than 3cm wide.
Finally we see the difference. The only problem for me is that when I called Suncoast this morning they told me they've only had one item # for clear side markers. I also called my local dealer and they only have one item # for clears and that is the one that ends in 10 not 00.

Last edited by Aperture776; 03-07-2011 at 09:57 PM.
Old 03-07-2011, 09:43 PM
  #43  
slwong23
Rennlist Member
 
slwong23's Avatar
 
Join Date: Sep 2010
Location: LA <> LV
Posts: 909
Received 406 Likes on 206 Posts
Default

Originally Posted by Aperture776
Finally we see the difference. The only problem for me is that when I called suncoast this morning they told me they've only had one item # for clear side markers. I also called my local dealer and they only have one item # for clears and that is the one that ends in 10 not 00.
Did you try Sunset? Maybe they are switching to a new part and phasing out the old...
Old 03-07-2011, 11:29 PM
  #44  
Mike in CA
Race Director
 
Mike in CA's Avatar
 
Join Date: Jun 2001
Location: North Bay Area, CA
Posts: 11,969
Received 128 Likes on 67 Posts
Default

Originally Posted by Aperture776
Ok now I see different item#'s. Your item number ends with 00 mine and Mike's end in 10. That might be the difference right there. I will try to call suncoast tomorrow and clarify again.
Please post what you find out. Thanks.
Old 03-08-2011, 02:47 PM
  #45  
Aperture776
Instructor
 
Aperture776's Avatar
 
Join Date: Nov 2010
Posts: 103
Received 30 Likes on 18 Posts
Default

Good news guys, the mystery is finally solved. Just spoke to Suncoast and there is indeed a part #

958 631 101 00
958 631 102 00


He was thankful for the info because he didn't even know there were two versions. He does not usually have those in stock and has to order them so I will be returning my clears and he will send the clears that end in 00 as soon as it comes in.

Suncoast has been great working with me and I definitely recommend them.


Quick Reply: 2011 side marker swap



All times are GMT -3. The time now is 09:39 AM.