ilko

Guys, I was doing some work on my brakes recently and discovered that the metal shield on my driver side is missing along with the bracket and bolts. The car is a 2010 RS w. PCCB. I looked at PET but could not locate a diagram showing these parts. Could someone help me out please?

Here's what the passenger side looks like with the shield on:



And here is the driver side without the shield. You can see the bolt hole right next to the rotor where the shield bracket is supposed to be mounted:



Any info would be greatly appreciated. Thanks!

ilko

Bump!! Nobody has this info?

RobT 394

Please confirm with Suncoast as I do not have the picture I took of the actual p/n I ordered. For the 10 the numbers should be:

996 352 801 30 L
996 352 802 30 R

ilko

Thanks but these parts are for the rear of the car. I need the front...

Spyerx

996.351.815.90 left, 996.351.816.90 right

ilko

Yep, that's the one, thank you! After I searched the part number I see another thread where this was discussed: https://rennlist.com/forums/997-gt2-...dy-thingy.html

I'm also missing the bracket and bolts that the air baffle plate attaches to. But since the diagram in the 997 GT PET doesn't have images of those parts do you know where I can find the part numbers? Thanks!