gt2-josh

Hey Gang,

I really need your help and I don't have a contact at PMNA.

I need the part numbers for everything other than the decklid.

I need the uprights, wing, endblades, and any hardware.

If you guys are super gurus it would also help to have some instructions on what I need to do to my intake/airbox/filter to adapt this to my 2007 GT3 street.

Any help is greatly appreciated. I do not have a contact at PMNA and I think they will simply hang up on me

Thanks in advance. VERY long time member here despite my low post count.

Best, Josh

PS If you are not certain whether its possibly 996 or something else please refrain from posting. I don't mean to sound like a jerk but the guy told me you get it wrong and I buy it. Period, hard stop. Thanks again.

bmwtye

Here is a good resource for the PETs if you don't have

URL removed, pm me if you need it

bmwtye

Also are you looking for the 997.1 cup stuff or 997.2 cup stuff. If 997.2 cup then you should read my build thread.

gt2-josh

Thank you! Your car is awesome. BTW I just bought one of the sets that was ordered/built when you bought yours. Except mine are Satin Black also five lug and built for a narrow body. Mxxxy aka J is a long time friend of mine and while I wasn't part of the original ordered I scored a set second hand. To answer your question I specifically want a GT3 Cup1 Wing / Decklid. If anyone will take the time to list the parts I would be greatly appreciated. Basically decklid, uprights, wing and endplates. Thanks for your message. LOVE your car.....

mooty

josh, do you want the PN or do you want the actual parts?

gt2-josh

I want both. Ideally I would like to find a wing and decklid. Another option is a guy that might be able to order the parts from PMNA, he is a reputable dude. The problem is he doesn't really want to order the wing, endplates and uprights. He said he will do it as a favor for me but only with part numbers. Good to hear from you J!!

Best, Josh 415 516-5778

runet

I have som parts that I never used for my old 996 GT3. Decklid is Getty CF for 996 and I dont think it'll fit a 997, but wing and endplates is 996 RSR/997 Cup (65" wide I think) motorsport parts painted black. Uprights is custom made and bought from user on this forum (New and unused), higher than OEM, lower than roof height.





Let me know if it is of interest.

entityx

I have a wing and uprights locally if you're interested https://rennlist.com/forums/parts-ma...-cup-wing.html

gt2-josh

I have responded to everyone in the thread either in the thread or via PM. Thanks guys. This is a great community!! Best Josh