Featherlite Norcal
#4
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#6
Rennlist Member
Cool !
next:
adjustable height hitch
prodigy rf brake controller or hard wire one into cayenne
call trailex and order their tire rack
go to amazon and order the UWS tongue box (the bigger one)
Hardware store for a bunch of grade 8 hardware to mount box and rack
Spare tire mount (if you didn't get one) and a spare tire/wheel
And the super-trick extra fender bolt mod that i stole from ... was it mikymu? can't remember
next:
adjustable height hitch
prodigy rf brake controller or hard wire one into cayenne
call trailex and order their tire rack
go to amazon and order the UWS tongue box (the bigger one)
Hardware store for a bunch of grade 8 hardware to mount box and rack
Spare tire mount (if you didn't get one) and a spare tire/wheel
And the super-trick extra fender bolt mod that i stole from ... was it mikymu? can't remember
#7
Rennlist Member
Thread Starter
Cool ! next: adjustable height hitch prodigy rf brake controller or hard wire one into cayenne call trailex and order their tire rack go to amazon and order the UWS tongue box (the bigger one) Hardware store for a bunch of grade 8 hardware to mount box and rack Spare tire mount (if you didn't get one) and a spare tire/wheel And the super-trick extra fender bolt mod that i stole from ... was it mikymu? can't remember
Controller done
Spare wheel purchased
Rest to do this weekend - tell me more about fender bolt mod
Trending Topics
#8
Rennlist Member
Oh yeah, 4" long race ramps. You need those too.
Basically the little lift latches kinda suck at holding the fender if it gets hit by a blow-out. The theory is this will help to keep them on the trailer. That's the theory. :-) You could also put a padlock on them to keep the metal recyclers from stealing your fenders (or at least slow them down about 15 seconds)
In a blow out the fenders are known to leave themselves on the highway, sometimes leaving a nice set of scratches down the side of your car on the way off.
Home depot:
4 gate hasps (latches, i used stainless)
Appropriate qty of bolts and washers (i used stainless)
4 cotter pins
A drill/bit
let me know if you want any further pics of my accessories/mods. this is a really nice trailer.
Basically the little lift latches kinda suck at holding the fender if it gets hit by a blow-out. The theory is this will help to keep them on the trailer. That's the theory. :-) You could also put a padlock on them to keep the metal recyclers from stealing your fenders (or at least slow them down about 15 seconds)
In a blow out the fenders are known to leave themselves on the highway, sometimes leaving a nice set of scratches down the side of your car on the way off.
Home depot:
4 gate hasps (latches, i used stainless)
Appropriate qty of bolts and washers (i used stainless)
4 cotter pins
A drill/bit
let me know if you want any further pics of my accessories/mods. this is a really nice trailer.
#9
Rennlist Member
Thread Starter
Thanks I basically have a mini me setup to yours so will shoot you email with questions as I go.
Kas did a ton of research on this trailer too and he sent me a shopping list which I've been following as well
What winch did you get?
Kas did a ton of research on this trailer too and he sent me a shopping list which I've been following as well
What winch did you get?
#10
Rennlist Member
I just drive on, but winch is on the list. At some point space becomes an issue, and I'm debating using the front space on the deck between the front lip and the railing for gas cans... Would be interested in seeing pics of a setup. Including battery location + wiring.
#11
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
do what spyerx did. ou will be golden.
the man is a smarter mcgyver
now with trailer, you have no excuse to miss my next TH event.
the man is a smarter mcgyver
now with trailer, you have no excuse to miss my next TH event.
#12
Rennlist Member
Thread Starter
#13
I still need to add a shelf below the tire rack for race ramps.
#15