question about rear toe links (locking plates)
07-20-2016 | 05:37 PM
#16
Drifting
Joined: May 2012
Posts: 2,843
Likes: 53
From: The Republic
Yes, just the elephant plates should work. The stock toe links run out of eccentric range (too short to achieve toe in) if you try to get over 3 degrees of camber through control arm shims and adjustment. That's when adjustable links are a must, or elephant makes an eccentric bushing for the stock toe arm which I am using now.
The front is adjusted through shims and not an eccentric bolt right? Is the bushing for the front or rear stock toe arm? Looks like a rear in the pic.
07-27-2016 | 01:44 PM
#17
Drifting
Joined: May 2012
Posts: 2,843
Likes: 53
From: The Republic
Yes, just the elephant plates should work. The stock toe links run out of eccentric range (too short to achieve toe in) if you try to get over 3 degrees of camber through control arm shims and adjustment. That's when adjustable links are a must, or elephant makes an eccentric bushing for the stock toe arm which I am using now.