GT3 Picture Thread
The following users liked this post:
seis-speed (06-04-2022)
The following 3 users liked this post by limitedslip:
#2180
#2181
The following 3 users liked this post by Sdgg993:
#2183
Ducktail looks pretty good!
It works much better on a .1 than a .2 IMO.
I’ve been trying to source an OE trunk or something similar to cut up for some time now to do something a bit similar.
Leaving all the OE pieces in tact, but just shaving the wing. Another member here did it some time ago. I would ideally leave the gurney flap black.
It works much better on a .1 than a .2 IMO.
I’ve been trying to source an OE trunk or something similar to cut up for some time now to do something a bit similar.
Leaving all the OE pieces in tact, but just shaving the wing. Another member here did it some time ago. I would ideally leave the gurney flap black.
Last edited by ljmartyre; 05-31-2022 at 05:39 PM.
#2184
Ducktail looks pretty good!
It works much better on a .1 than a .2 IMO.
I’ve been trying to source an OE trunk or something similar to cut up for some time now to do something a bit similar.
Leaving all the OE pieces in tact, but just shaving the wing. Another member here did it some time ago. I would ideally leave the gurney flap black.
It works much better on a .1 than a .2 IMO.
I’ve been trying to source an OE trunk or something similar to cut up for some time now to do something a bit similar.
Leaving all the OE pieces in tact, but just shaving the wing. Another member here did it some time ago. I would ideally leave the gurney flap black.
The following users liked this post:
Robocop305 (05-31-2022)
The following users liked this post:
Robocop305 (05-31-2022)
#2187
I did it on my GT4 and I enjoyed the look. Its just of fun to change it in and out depending on what I'm feeling like.
Here's some renders I did.
The following users liked this post:
smceo (05-31-2022)
The following users liked this post:
rrichmondd (06-01-2022)
#2189
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jun 2019
Posts: 604
Likes: 420
From: San Francisco Bay Area
__________________
Joie de vivre 🏁🇺🇸🇹🇼
Professional Enthusiast
San Francisco Bay Area, CA
SYSTEM MOTORSPORTS
RAYS / ADVAN / BBS - RETAIL / WHOLESALE
@thomsonsss / @systemmotorsports
Joie de vivre 🏁🇺🇸🇹🇼
Professional Enthusiast
San Francisco Bay Area, CA
SYSTEM MOTORSPORTS
RAYS / ADVAN / BBS - RETAIL / WHOLESALE
@thomsonsss / @systemmotorsports
#2190
Regarding aero, likely you are right at high speeds but around town I probably won’t notice it. I can swap the deck lid out in about 15-20 min for the track. Although I am curious to feel the difference, I may even take it to the track with me and swap it there for a direct comparison.
The following 3 users liked this post by Sdgg993: