Matte White Seat Back
#1
Rennlist Member
Thread Starter
Matte White Seat Back
Had some scratches on the back of my passenger seat from hitting the roll bar, so thought I'd try this. I think it turned out great. I love how it looks through the back window. It's hard to tell that it's matte in the pictures though.
#4
Rennlist Member
Thread Starter
Thanks guys! I didn't do it myself, but basic process... clean, lay down the vinyl, trim to fit, then tuck the edges away. It took them about 3 hours while being pretty careful trimming around each piece.
#5
Rennlist Member
Looks great is flat white. I have high-gloss white seat backs and love the look.
Mine looks a little 'goofy' now that I have a race seat on the driver's side and it's back is black and someone said it's not a good idea to paint those and cover up the sticker data.
Mine looks a little 'goofy' now that I have a race seat on the driver's side and it's back is black and someone said it's not a good idea to paint those and cover up the sticker data.
Trending Topics
#8
Rennlist Member
Not for me but i like it better and cheaper them oem painted option. When you change your mind rip it off. Might not be a bad idea to wrap the setbacks to prevent scratching the CF seat backs on the sport seats!
#9
Rennlist Member
Thread Starter
^ Yep, exactly why I did it. If mine didn't have a few scratches, I would have left well-enough alone. But, it is an easy solution that looks better than scratched seat backs
#12
Rennlist Member
Thread Starter
Car came that way. I have the hardware to swap the bar out, but spend most of my weekends working on my other track car.
#14
Race Director
Why do you have a harness/roll bar but you don't have seats that accept a harness?
Great idea to hide the marks though!
Great idea to hide the marks though!
#15
Rennlist Member
Thread Starter
Thanks! Re: the bar: Car came that way. I have the hardware to swap the bar out, but spend most of my weekends working on my other track car.