19" Forgeline GA3R centerlocks are here
#76
Rennlist Member
Join Date: May 2006
Location: sydney
Posts: 6,222
Likes: 0
Received 0 Likes
on
0 Posts
#78
Race Director
#80
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
so whats the forgeline recommended offsets for 18x9 and 18x12 997.2 GT3 RS wheels that would run safely up to 255 width tires up front and 335 in back?
Is it going to clear the calipers more than BBS 3-piece wheels?
#81
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thank you. When should I expect that to be delivered? I know you've invested probably 2 weeks online trying to find a set of wheels that fit properly. Once you do, I'll expect a tracking number for my candy bar.
I was looking for a second set of wheels for my car. My only problem is that it took me 10 secs to find 10 sets that work. Just can't decide which ones
I was looking for a second set of wheels for my car. My only problem is that it took me 10 secs to find 10 sets that work. Just can't decide which ones
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#82
Rennlist Member
#83
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
We have decent caliper clearance at the +47 and would have even better with the +45
__________________
David Schardt
President
Forgeline Motorsports
3522 Kettering Blvd.
Dayton, Ohio 45439
http://www.forgeline.com
David Schardt
President
Forgeline Motorsports
3522 Kettering Blvd.
Dayton, Ohio 45439
http://www.forgeline.com
Facebook Post
#84
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Our standard fitment for an RS is 18x9 +47 However, for a for a 255/35R18 Hoosier to work a +45 offset would be the way to go to get it away from the strut, and this would be a tight fit as that tire is 10.8" wide. The Toyo in comparison in the same size is 10.2" 18x12 at a +47 for the rear. (standard fitment)
We have decent caliper clearance at the +47 and would have even better with the +45
We have decent caliper clearance at the +47 and would have even better with the +45
(the rear will be 335/30 R18 BFG-R1)
Thanks
#85
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just a heads up that we have special pricing on these wheels for Rennlist members. We have been working with a couple of the folks who have posted on this thread already about Forgelines as well.
David, Scott and the rest of the Forgeline crew stand behind their product and produce a very high quality wheel. Drop us an email if you are interested.
Cheers
David, Scott and the rest of the Forgeline crew stand behind their product and produce a very high quality wheel. Drop us an email if you are interested.
Cheers