Endless RF 650
02-23-2011 | 11:32 PM
#16
Race Director
Joined: Mar 2006
Posts: 15,358
Likes: 183
From: Tampa
02-24-2011 | 11:54 AM
#17
Wordsmith
Rennlist Member
Rennlist Member
Joined: Feb 2003
Posts: 8,623
Likes: 10
You need to do a full flush with the Endless RF650 just like the SRF. We use it on cars with ABS as well with no problems. I recommend 2 L for a full flush (4 cans). You might not end up using all of it, which means you have some left to spare. It is OEM fill in the 997 Cup Cars & RSRs.
02-24-2011 | 08:05 PM
#18
Thread Starter
Rennlist Member
Joined: Oct 2009
Posts: 1,931
Likes: 102
From: OH
02-24-2011 | 08:06 PM
#19
Thread Starter
Rennlist Member
Joined: Oct 2009
Posts: 1,931
Likes: 102
From: OH
02-25-2011 | 08:21 PM
#22
Race Director
Joined: Mar 2006
Posts: 15,358
Likes: 183
From: Tampa
I have heard about cycling the ABS with a service tool but I've never done it. Even my Porsche dealer uses a Motive bleeder only to bleed or flush fir track guys. I bleed before each event doing the work now by myself with my Motive bleeder... good through bleed and do not have issues. Could you explain more about cycling the ABS and this service tool
02-25-2011 | 09:09 PM
#23
Rennlist Member
Joined: Sep 2009
Posts: 737
Likes: 109
From: The Smokies
Not meaning to turn this into a DIY, but when you use the Motive, how much do you collect at each caliper assuming you are "pushing" all the existing fluid through the system without taking a turkey baster to the reservoir? I would like to handle it as little as possible.
I have heard you get about 1/3 liter out of the right rear, and then less as you work toward the front of the car and reservoir.
I have heard you get about 1/3 liter out of the right rear, and then less as you work toward the front of the car and reservoir.
02-25-2011 | 10:36 PM
#24
Rennlist Member
Joined: May 2003
Posts: 938
Likes: 1
From: PA
I have heard about cycling the ABS with a service tool but I've never done it. Even my Porsche dealer uses a Motive bleeder only to bleed or flush fir track guys. I bleed before each event doing the work now by myself with my Motive bleeder... good through bleed and do not have issues. Could you explain more about cycling the ABS and this service tool
02-26-2011 | 12:05 AM
#25
Drifting
Joined: Nov 2006
Posts: 2,188
Likes: 5
From: Toronto
I too have flushed brakes a million times without cycling the ABS system and wonder if it is really needed. I recognize that there may be fluid in the ABS pump which is not being replaced, but it will be expelled the next time I get into ABS braking and replaced with the new stuff, right? And I assume the quantity is minuscule compared to the rest of the system so it will mix and effectively be subsumed. Or have I misunderstood how the system works?
You were too fast that day
Paul
02-26-2011 | 09:31 AM
#26
Rennlist Member
Joined: May 2003
Posts: 938
Likes: 1
From: PA
Hi Paul - that really was a great weekend and I suspect you have upped your game since then while I haven't. The picture was from a Riesentoter weekend, taken by a fellow member, so I guess that's not you. Are you going to try to do Cups and Saucers this year?
