STRIP CLUB......
#16
Admin
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Very nice! But where is the carbon bonnet?
+1 on side protection if you r planning to keep the car with these doors.
John
And btw mobonic Porsche didnt add anything to the cage of the 2RS for the 24h. The newer oem cage has the 2 side bars already.
+1 on side protection if you r planning to keep the car with these doors.
John
And btw mobonic Porsche didnt add anything to the cage of the 2RS for the 24h. The newer oem cage has the 2 side bars already.
#18
Three Wheelin'
That's some hefty Dieting!
#19
Rennlist Member
Join Date: Feb 2006
Location: Wishing I Was At The Track
Posts: 13,658
Received 1,884 Likes
on
972 Posts
What's the weight gain on two side bars vs the savings on Cup door? Aren't you really just swapping one safety system (door beams and air bags) for another (side bars) or is there still a significant weight saving?
#22
Rennlist Member
Thread Starter
Join Date: May 2008
Location: Somewhere in a galaxy far, far away....
Posts: 17,108
Likes: 0
Received 259 Likes
on
173 Posts
This is a win win win!
The car will accelerate, brake and corner better.... weight loss in THE best way to improve a 911's performance.
I would recommend more side protection, perhaps have someone weld a side bar onto the roll cage (exactly what Porsche did when it entered the 2010GT3RS in the 24 NR race).
The car will accelerate, brake and corner better.... weight loss in THE best way to improve a 911's performance.
I would recommend more side protection, perhaps have someone weld a side bar onto the roll cage (exactly what Porsche did when it entered the 2010GT3RS in the 24 NR race).
Im considering getting the new front factory 2010 cage that now includes the additional bar. This is the bar seen in the 24H race. (Semcon manufactured for Porsche)
#23
If this will be a track car (why not you have 2 of them), I suggest:
Replace steering wheel with cup car OMP (18+lbs)
Replace stock exhaust with straight pipes or supercup system (60+lbs)
Install underdrive pulley (if you want to keep AC)(+5HP)
After that is just a matter of gutting the car completely.. then you can take 150+ more pounds out easy.
You can get this car to weigh 2700 lbs pretty quickly
Replace steering wheel with cup car OMP (18+lbs)
Replace stock exhaust with straight pipes or supercup system (60+lbs)
Install underdrive pulley (if you want to keep AC)(+5HP)
After that is just a matter of gutting the car completely.. then you can take 150+ more pounds out easy.
You can get this car to weigh 2700 lbs pretty quickly
#24
Rennlist Member
Are the doors for the Targa only, and then back to stock? Do you plan on corner weighing the car after the weight loss? Would love to see the results.
Dino
Dino
#25
Rennlist Member
Thread Starter
Join Date: May 2008
Location: Somewhere in a galaxy far, far away....
Posts: 17,108
Likes: 0
Received 259 Likes
on
173 Posts
If this will be a track car (why not you have 2 of them), I suggest:
Replace steering wheel with cup car OMP (18+lbs)
Replace stock exhaust with straight pipes or supercup system (60+lbs)
Install underdrive pulley (if you want to keep AC)(+5HP)
After that is just a matter of gutting the car completely.. then you can take 150+ more pounds out easy.
You can get this car to weigh 2700 lbs pretty quickly
Replace steering wheel with cup car OMP (18+lbs)
Replace stock exhaust with straight pipes or supercup system (60+lbs)
Install underdrive pulley (if you want to keep AC)(+5HP)
After that is just a matter of gutting the car completely.. then you can take 150+ more pounds out easy.
You can get this car to weigh 2700 lbs pretty quickly
Supercup style (no mufflers) exhaust installed.
Not sure about underdrive pulley...... i do enjoy A/C
#27
Rennlist Member
Clubsport glass???
Cup doors are fantastic...with door bars.
Cup doors are fantastic...with door bars.