Rennlist - Porsche Discussion Forums - View Profile: mikymu

Notices

mikymu mikymu is offline

Addict
Rennlist Member

Visitor Messages

Showing Visitor Messages 1 to 10 of 23
  1. hoops25
    01-29-2016 03:33 PM
    Thank you for the advice.
  2. mikymu
    01-29-2016 02:01 PM
    with stock muffler you can pass sound if you rout the side muffler to close the valve as I have demonstrated on my post - but do open the valve again after sound station so the excess back pressure do not damage your exhaust or engine
  3. hoops25
    01-29-2016 12:12 AM
    I had a feeling you might say that. What if I re-installed the stock muffler on my 2014 GT3? Is there anything I could do or modify to pass sound then? Thanks.
  4. mikymu
    01-28-2016 06:21 PM
    I don;t think you will be able to pass sound at LS with center bypass
  5. hoops25
    01-28-2016 02:20 AM
    Hi Mike,

    I read your 3 second sound buster modification thread, but it was a few years old so I wanted to check with you... I have a 2014 GT3 with a sharkwerks bypass exhaust and want to track the car at Leguna Seca. Will your modification allow me to pass sound? Any advice would be appreciated. Thanks.
    Chris
  6. SmokinGTS
    01-17-2015 01:39 PM
    Hi Mike
    I have a buddy of mine who lives in Chico and recently spun his 993 and hit a curb breaking some rear suspension parts. We need to get him a good corner balance alignment. Can you recommend a shop in Sac or your area. I'll try and make Thunderhill this year, Its a bit of a drive from Seattle.
    I like your PSE fix. My GT3 is sitting in port in SD and when I get it I will see if it will work on a 991.
    Thanks
    Ed
  7. mikymu
    12-27-2013 03:49 AM
    Hi Stenoxp

    Sorry I don't have the measurement or technical drawing
  8. stenoxp
    12-26-2013 06:15 PM
    Hello,
    I apologize for the inconvenience and for the bad English, I would like to ask you a great courtesy, I'm building a scale model of the 911 GT3 and I saw that she owns lever sequential gearbox that I should reply, I ask if he can give me the measures about it, or better, if you have the technical drawings with these measures.
    My e-mail is [email protected]

    the lever is
  9. mikymu
    08-15-2013 12:30 AM
    They are OEM GM part from GM warehouse
  10. ogweewee
    08-14-2013 09:51 PM
    Ok, thanks. Do you remember where you bought them from?

About Me

  • About mikymu
    Location
    California

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 04-16-2018 01:22 AM
  • Join Date: 01-14-2009

Friends

Showing Friends 1 to 3 of 3

Contact Us Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.