Europipe Race Exhaust Dyno and Pics
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Had the EUROPIPE RACE EXHAUST installed at HEYVON MOTORS in Orange County. Great shop have had work done there before, Run by brothers John and Serge, great guys been to track w/ them before as well, very knowledgeable and helpful.
Had car dyno'd at AUTOWAVE at appx 1pm (has sharkwerks center muffler bypass) max dyno showed 392 whp. Had exhaust installed got back to autowave around 4. Dyno'd with Europipe Full Muffler Delete Race Exhaust, max dyno read 405whp. Graph shows power/torque loss before appx 3200rpm after that 5000rpm there is almost a 25-30whp gain with 13whp at the top. This is WITHOUT A TUNE. Done same day, same dyno, within 4hrs.
The quality of the exhaust is fantastic, great welds. Ideally $600 is a rip off for 2 pipes, but in comparison it is cheap compared to what else is out there and is definitely worth the money.
We recorded some vids ill get them up as soon as they are sent to me! CAR SOUNDS SOOOOO CRAZY!!! BUT DOESNT REALLY DRONE ITS JUST LOUD AS HELL! BACKFIRE SOUNDS, SOUNDS LIKE THE CARS BEHIND ME ARE BEING SHREDDED APART. LOL IM IN LOVE![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Dyno Graph
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/DSCF1460.jpg)
Arrived packed well
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/DSCF1458.jpg)
Pipes
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-2aspx-4.jpg)
Stock side muffler w/ sharkwerks center muffler delete
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-3aspx-3.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-4aspx-2.jpg)
John and Serge at work
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-5aspx-2.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-6aspx-2.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-7aspx.jpg)
Had car dyno'd at AUTOWAVE at appx 1pm (has sharkwerks center muffler bypass) max dyno showed 392 whp. Had exhaust installed got back to autowave around 4. Dyno'd with Europipe Full Muffler Delete Race Exhaust, max dyno read 405whp. Graph shows power/torque loss before appx 3200rpm after that 5000rpm there is almost a 25-30whp gain with 13whp at the top. This is WITHOUT A TUNE. Done same day, same dyno, within 4hrs.
The quality of the exhaust is fantastic, great welds. Ideally $600 is a rip off for 2 pipes, but in comparison it is cheap compared to what else is out there and is definitely worth the money.
We recorded some vids ill get them up as soon as they are sent to me! CAR SOUNDS SOOOOO CRAZY!!! BUT DOESNT REALLY DRONE ITS JUST LOUD AS HELL! BACKFIRE SOUNDS, SOUNDS LIKE THE CARS BEHIND ME ARE BEING SHREDDED APART. LOL IM IN LOVE
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Dyno Graph
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/DSCF1460.jpg)
Arrived packed well
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/DSCF1458.jpg)
Pipes
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-2aspx-4.jpg)
Stock side muffler w/ sharkwerks center muffler delete
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-3aspx-3.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-4aspx-2.jpg)
John and Serge at work
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-5aspx-2.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-6aspx-2.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-7aspx.jpg)
![](http://i475.photobucket.com/albums/rr118/sammyrusso85/GT3/GetAttachment-9aspx.jpg)
#3
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
* wanted to add this:
I honestly wasnt expecting to gain any hp really, from all the different **** i hear back and forth, wanted to lose the weight and hopefully not lose power, as europipe advertises no power loss. I have no connections to any companies, dyno'd at an independent shop, installed at another shop...i was extremely surprise when we threw my car on the dyno the 2nd time. Also note that europipe uses stock 63 mm piping to help maintain back pressure
I honestly wasnt expecting to gain any hp really, from all the different **** i hear back and forth, wanted to lose the weight and hopefully not lose power, as europipe advertises no power loss. I have no connections to any companies, dyno'd at an independent shop, installed at another shop...i was extremely surprise when we threw my car on the dyno the 2nd time. Also note that europipe uses stock 63 mm piping to help maintain back pressure
#4
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The Europipe race exhaust really got my attention a couple of weeks ago. Very well done and Europipe has incredible reputation with exhausts
Like said here, at $ 600.00 it's 50% cheaper compared to a center delete pipe and 70% cheaper than other race exhausts
Like said here, at $ 600.00 it's 50% cheaper compared to a center delete pipe and 70% cheaper than other race exhausts
#5
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nice one Sammy and see one can actually make power with these when you keep the stock cats/headers
Track style exhausts are intense eh? Stef/Herman are great guys and I've worked with them for yours. Good eggs indeed!
Be careful as it's VERY loud and will attract attention. You'll see what I mean on Thursday night:P
PS As far as loosing TQ etc... like I always say you loose some and down-low below 4000 rpms but that's not where most GT3s live now is it
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Be careful as it's VERY loud and will attract attention. You'll see what I mean on Thursday night:P
PS As far as loosing TQ etc... like I always say you loose some and down-low below 4000 rpms but that's not where most GT3s live now is it
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#6
Rennlist Member
Thread Starter
Trending Topics
#8
Rennlist Member
Join Date: May 2008
Location: Somewhere in a galaxy far, far away....
Posts: 17,107
Likes: 0
Received 259 Likes
on
173 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I had the porsche Super Cup pipes which are $6000.00.
Same idea, no mufflers and bolts to stock headers and cats.
Sounds great. Makes decent power and saves weight. ( they were damaged in crash 2009
)
A little much for the street however. I think the Sharkwerks track exhaust which has the little built-in mufflers would be a nice compromise in terms of noise.
Super fun though![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
an uncorked GT3 at full song between 3rd and 4th gear high RPM shifting is bliss. Every GT3 owner should experience it.
If you every watched the film "Le Mans" at high volume during the 918 segments you will know what im talking about....
Same idea, no mufflers and bolts to stock headers and cats.
Sounds great. Makes decent power and saves weight. ( they were damaged in crash 2009
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
A little much for the street however. I think the Sharkwerks track exhaust which has the little built-in mufflers would be a nice compromise in terms of noise.
Super fun though
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
an uncorked GT3 at full song between 3rd and 4th gear high RPM shifting is bliss. Every GT3 owner should experience it.
If you every watched the film "Le Mans" at high volume during the 918 segments you will know what im talking about....
#9
#11
Rennlist Member
Join Date: Sep 2010
Location: Southern California
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
In the vid's it seems "manageable" espically in the vids posted by the Green RS in Kuwait.
What attracts me the most is the big weight savings, over the common bypass systems, which i'm a big fan of.
Anyone else heard this in person?
What attracts me the most is the big weight savings, over the common bypass systems, which i'm a big fan of.
Anyone else heard this in person?
#14
Rennlist Member
Join Date: Sep 2010
Location: Southern California
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thats great! I'm more concerened about leaving my neighborhood at 5:00am for a DE or carshow and driving all the neighbors crazy. I'm sure cold starts are brutal with this baby.
Really i want to know at idle and low rpm how much lowder it is than a bypass with the flappers open.
Really i want to know at idle and low rpm how much lowder it is than a bypass with the flappers open.
#15
Admin
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thats great! I'm more concerened about leaving my neighborhood at 5:00am for a DE or carshow and driving all the neighbors crazy. I'm sure cold starts are brutal with this baby.
Really i want to know at idle and low rpm how much lowder it is than a bypass with the flappers open.
Really i want to know at idle and low rpm how much lowder it is than a bypass with the flappers open.
"Baby sleeping at the house down the road will wake up" loud.