BBS wheels and PAGID pads
#31
Former Vendor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
soemtimes they do stuff because its easy.
after all its your car, not theirs.
#33
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That is very true.. I agree w/ you 100% there..
But from what I can see.. they use the point where the cases join together. It looks to be a pretty strong point.
But from what I can see.. they use the point where the cases join together. It looks to be a pretty strong point.
#34
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
#37
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
#38
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
the off set is too aggresive for non RS, so it's pushed out.
however, BBS at GA headquarter did tell me that if you run it with track alignemnt on non RS, you will be ok. i take that to be no less than 2.5 deg
here is the offset
9x18 ET43mm
12x18 ET48mm
my "guess" is that they will fit. but i can't guarantee it and i dont want ppl to get upset at me if the rubber touched fender lip.
just like 996gt3, if you run 12, your fender lip is rubbed. you ca'nt see it usually. but take wheel off, get your head inside the fender then look OUT toward the lip, you will see rub mark. most ppl dont detail that part of their cars. so they tell you they dont rub.. but 12" rear will rub 996 unless you roll fenders.
however, BBS at GA headquarter did tell me that if you run it with track alignemnt on non RS, you will be ok. i take that to be no less than 2.5 deg
here is the offset
9x18 ET43mm
12x18 ET48mm
my "guess" is that they will fit. but i can't guarantee it and i dont want ppl to get upset at me if the rubber touched fender lip.
just like 996gt3, if you run 12, your fender lip is rubbed. you ca'nt see it usually. but take wheel off, get your head inside the fender then look OUT toward the lip, you will see rub mark. most ppl dont detail that part of their cars. so they tell you they dont rub.. but 12" rear will rub 996 unless you roll fenders.
Very considerate!
Best regards, w