almeena58

Hi,

How to correctly install Porsche six-point racing harness in 2010 GT3 of course with clubsport and sport bucket seats. i want to do it myself not the dealer.

if possible with steps & pics.

thanks...

Heeltoego

drop me an email or message and I can help you out...

Larry Cable

do you have sub belt bars installed on the seats yet?

Anders

There should be no need for bars on a clubsport, just bolt the subbelts to the floor.

Larry Cable

sure if you feel like drilling holes in the floor of your car ... or do the RoW cars come with the mount points already?

Anders

No need for drilling. The clubsport comes with the mount points.

mooty

man, do we in USA feel short changed. we dont have such mounting points, no plexi rear window, and no mounting plate for OEM roll bar..... but i was told GT3 here are much cheaper than the rest of the world. so i guess that's ok.

Carrera GT

sheeeet. <spit>

almeena58

Thanks Larry & yes Anders this is what i have in my car already coimg with these holes but the thing is the two belts that shoud come from the sides of the seats,

the Harness coming already with nails ( 2 long & 2 short) but when checking the floor their are already two nails scrowed. shoud i unscrow them. sorry i am in office now and my car in the garage so i can't take pics. so where to screw the long and the short!!

thank....

almeena58

Thanks, but better to post here to let others get benefits, nothing to hid

Anders

The lapbelts are not bolted to the seats, they are bolted to the tunnel and the mount point where the 3-point seat belt goes on cars with reuglar seats.

My dealer mounted mine so I'm not sure but it sounds like you should remove the bolts on the floor.

mikymu

Just don't slide your seats once you are buckle in unless you want to strangulate your *****. I prefer sub-mount bars under the seat ... unless I wear a cup on the track lol

Anders

Fair warning - being used to the 996 way I almost did just that the first time out with the new car...

Anders

I hear you... We pay about 25% more than you guys for the GT3 (on par with German prices) so I'm glad we get something more out of it. Also we can order the proper seats (j/k) .

almeena58

Yes Andres sure it must not be bolted to the seat, but i mean through the two side holes of the seat's sides. i will give it a try and feedback.

thanks...