Rotor Question
#1
Thread Starter
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 43,564
Likes: 5,894
From: san francisco
Rotor Question
please provide the following diameters, thank you.
997GT3 RS front PCCB
997GT3 RS front iron
997GT3 RS rear PCCB
997GT3 RS rear iron
996GT3 front PCCB
996GT3 front iron
996GT3 rear PCCB
996GT3 rear iron
997GT3 RS front PCCB
997GT3 RS front iron
997GT3 RS rear PCCB
997GT3 RS rear iron
996GT3 front PCCB
996GT3 front iron
996GT3 rear PCCB
996GT3 rear iron
#2
997GT3 RS front PCCB 380 x 34 mm
997GT3 RS front iron 350 x 34 mm
997GT3 RS rear PCCB 350 x 28 mm
997GT3 RS rear iron 350 x 28 mm
996GT3 front PCCB
996GT3 front iron 350 x 34 mm
996GT3 rear PCCB
996GT3 rear iron 350 x 28 mm
997GT3 RS front iron 350 x 34 mm
997GT3 RS rear PCCB 350 x 28 mm
997GT3 RS rear iron 350 x 28 mm
996GT3 front PCCB
996GT3 front iron 350 x 34 mm
996GT3 rear PCCB
996GT3 rear iron 350 x 28 mm
#3
I thought the 996 and 997 front iron rotors were not the same size, or is it just the calipers that are different. Hey what is going on hear, Mooty you are the one that usually answers the questions, not ask?
#5
The iron 996 GT3 rear is a 330x28, with PCCB at 350x28.
Same front rotors for iron 996 and 997 GT3. Calipers are the same as well, but not the uprights.
The PCCB 7GT3 uses a different upright than the cast iron rotors 7GT3, and a different caliper as well.
Rear calipers are unique to the 997 GT3.
Front rotors for PCCB equipped 997 GT3 can be swapped with 997 Cup rotors (31 lbs rotors).
Same front rotors for iron 996 and 997 GT3. Calipers are the same as well, but not the uprights.
The PCCB 7GT3 uses a different upright than the cast iron rotors 7GT3, and a different caliper as well.
Rear calipers are unique to the 997 GT3.
Front rotors for PCCB equipped 997 GT3 can be swapped with 997 Cup rotors (31 lbs rotors).
#6
Thread Starter
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 43,564
Likes: 5,894
From: san francisco
todd, i had some clue about disc sizes, but after my move, i got crap all over the place, can't jack my car up, can't find a bunch of tools (packing my stuff in identical looking trash bags, didn't help..... )... so i figured it's faster to ask.
Trending Topics
#8
I hope you have a little extra garage space, can never have to much. I envy our fellow renlisters who have garage lifts, I have to bust butt with two floor jacks.
#9
Thread Starter
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 43,564
Likes: 5,894
From: san francisco
i keep telling wife that my back hurts, maybe one day she will buy me a lift.