sharkster

Hey folks, just a quick note to say thanks again for all the support and to let you know that we've now got some larger/lighter tips. Over the last few months some of you with our bypass set up have requested some larger (and affordable) tips and so we've partnered with our friends here in Californa at RSS (RoadSportSupply of the IPD Plenum fame) to produce a batch which will be available next week:

http://www.sharkwerks.com/products.php?pid=173




These larger 87mm tips have been ceramically heat treated with a satin black finish to remain OEM-like in both fitment and appearance. As an easy ten minute bolt-on, our tips are designed to fit the stock exhaust system, our muffler bypass and/or any after-market exhaust system that accepts factory-style tips. We actually shaved .75 pounds off of the stock units (wee!) and they're roughly 2 pounds lighter than some of the heavier after-market set ups. During testing on local tracks (mentionind no names Fred!) we even encountered instances of after-market and stock center sections cracking due to the added stress of increased weight from larger/heavier tips suspended out the rear on an already high temperature and metal-stressed area.

Fitment:
Works with SharkWerks Bypass System
Works factory Exhaust
Works with after-market systems that accept factory tips

For those of you interesed in a set feel free to contact us alex@sharkwerks.com or Greg on sales@roadsportsupply.com

TripleM

Alex
Looks v nice..

sharkster

Danke Simple but hopefully still "tasteful".... So far people that have seen them on ours either didn't notice at first (I think that's good lol!) or liked them a lot. I guess they don't stand out too much, which I think is good...

Carnerd

Shark, you need a muffler by-pass version II with RSR style 4" tips!!!

O and from all the guys going to the LB Grand Prix this weekend, "Put those GT700's, and GT3's on hold so you can come with us!!!"

sharkster

ROFL.. funny you say that because the first version of the "Fred" straight pipes were tested on our car and had exatcly that by defauly... Only then nobody liked it LOL!

I really wish I could come down with you guys... Shame I'm going to mis it but be safe and have a fun trip.... Bring your ear plugs for Fred's car

Carnerd

Already got my set! We're gonna miss ya bud!

peloton

Hey Alex, does this mean I get to replace those extra heavy aftermarket tips on my 3 that I got for xmas last year? You know, that ones that James had to bang on with a sledge hammer to get them to fit?

Awright, sign me up for two sets so I can pop them on both cars. Looking good!

Jon70

I have a set on mine, with the Sharkwerks bypass.

sharkster

Hey Peloton (got it right), oh those ones Aye they weren't my favorite

I'll put you down for a couple then!

rop3

I agree looks great!

LERA GT2

Alex:
Here is an idea, can you produce this tips with a colored ring on the "tip of the tip" in order to match your deviated stiching, brake calipers, rims, etc.

sharkster

Must say I never thought of that... I guess we're trying to keep things looking oem-ish rather than flashy but I don't that wouldn't actually work in the real world due to issues of heat....

Larry Cable

those look really sweet!

sharkster

Thanks Larry and you already have some sweet tips

sharkster

hey folks some of you wanted me to post pictures of the stock vs ours. A little hard to find and conjure up since I don't have pix from the same angle etc...Sorry for the picture clarity (lack of?!)